hpe室外标识报告招标

1、慧与公司HPE办公室新址-系统解决方案OFFICE -WAY FINDING SYSTEM SOLUTION慧与户外园区标识设计报告HPE OUTDOOR PARK SIGN DESIGN REPORT2016.6.01招标图纸TENDER DRAWINGSSITE CONTEXT ANALYSIS PEDESTRIAN TOUCHING POINT现场环境分析及行人节点分析车行园区Vehicle Entrance车行园区Pedestrian Entrance人行红线 Vehicle Circulation Flow车行流线及方向人行人行Vehicle Parking Entrance/Exi

2、t车库出Bicycle Parking Entrance/Exit自行车车库出车行园区HPE Outdoor image vertical plate户外的形象立式标识Outdoor park Point of direction户外园区的方向指引标识的点位此标识为“HPE大堂标识，WB建议再标识上增加”的指引。This is the signage provided by landlord,WB adviceadd in information of “HPE lobby entrance“.增加说明：此标示地面需要增加地灯以在夜晚照亮标示牌。To install floor light t

3、o make the signage visible at night .2134mm *2554mmSITE CONTEXT ANALYSIS PEDESTRIAN TOUCHING POINT现场环境分析及行人节点分析车行园区Vehicle Entrance车行园区Pedestrian Entrance人行红线Vehicle Circulation Flow车行流线及方向HPEHPI人行人行Vehicle Parking Entrance/Exit车库出Bicycle Parking Entrance/Exit自行车车库出电位预留位置Potential reservation positi

4、on车行园区人行HPE Outdoor image vertical plate户外的形象立式标识2000mmOutdoor park Point of direction户外园区的方向指引标识的点位1625mm 1625mmSPECIFICATION FOR SIGNS标识形式规范：2134*2554参照：HPE_SignFamily v1.5 P128'-4 9/16" (2554mm)7'-5"9"8'-0 3/8"4 3/16"1/4"1/4"10 1/2"7'-0 7/8&

5、quot;1 2.03 Large Monument Sign (58.66 SqFt / 5.45 SqM)2 End ViewScale: 1/2"=1'-0"Scale: 1/2"=1'-0"7'-0" (2134mm)6'-4 1/2"2'-4 1/4"6 5/8"7 1/2"10 1/2"4'-5 1/2"10 1/2"1"1"7 1/2"6"SIGN STRUCTURE SIZ

6、E AND PROCESS DESCRIPTION标识结构及工艺说明5'-0" OVERALL HEIGHT SIGN I.D.1 Message Panel1/8" THK. Aluminum sign face panel. Panel to be routed out for 1/2" thk. clear acrylic push through HP Letters/Logo Forms.Paint to match (P2)6'-0"参照：HPE_SignFamily v1.5 P35Sign Body2 Fabricated

7、 aluminum sign cabinet. Paint to match (P3)7 1/2" 3/4"5'-3 3/4"9"9"3 3/4"x 3/4"x 1/8" Channel accent reveal frame.Sign Reveal FramePaint to match (P1)5'-0 3/4"3"7 1/2"7 1/2"3/4"4 Hewlett Packard Enterprise Logo Forms2 P31/2&quo

8、t; thk. clear acrylic push through logo and letter forms with 1/4" projection. Applied first surface opaque Green (to match (V1) vinyl on logo Element. When signs are internally illuminated, di user film applied second surface is required.1 P25 Hewlett Packard Enterprise Letter Forms1/2" t

9、hk. clear acrylic push through logo and letter forms with 1/4" projection. Applied non-reflective vinyl opaque Black first surface on letters (to match (V4). When signs are internally illuminated, di user film applied second surface is required.4 V15 V46 Message Letters - AddressVinyl letters (

10、Metric Semibold typeface), with non-reflective vinyl opaque Black on first surface(to match (V4).7 Structural Angle Frames1-1/2"x 1-1/2"x3/16" Structural aluminum angle frame. Note: Additional Horizontal Structural Angle Frames may be Required. Engineers/Sign Contractors to be respons

11、ible for integrity of sign structure.3 P18 Structural Steel Post4"x 4"x 1/4" thk. wall steel post.9 Concrete Footing3,000PSI concrete pier (1x) at Ø18" and 48" deep.8510 Mounting Plate10"x10"x3/4" Base plate welded into 4"x4"x1/4" steel pos

12、t with 1/4" gusset Min. to be confirmed by engineering.11 Flood Lighting PreferredUse one of the two approved fixtures listed in the appendix or an approved equivalent. The performance specification is: Requirements definition:UL wet listed (IP66 NEMA 4X). 5,700 Kelvin color temperature.> 70

13、 CRI.Min. L70 50,000 Hours. Fixture to be black colored.Beam Angle: The beam angle of the chosen fixture shall accomodate the bull dimension of the signage in both height and width in as few fixtures as possible to minimize hot spots and uneven light distribution. Care must be taken that the light b

14、eam does not extend past the edges of the sign as this will create light pollution.For internal illumination of sign cabinets, use Agilight Box Rayz 600 LEDs (6500 K) with matched drivers.91'-6"2 Elevation - Side Frame1 Elevation - Front View3 Elevation - Side FrameScale: 3/4"= 1'-

15、 0"Scale: 3/4"= 1'- 0"Scale: 3/4"= 1'- 0"根据最终确定的标识大小，等比例缩放标识结构 ，但材质，工艺不变。Structure size will be adjusted on scale base on the final confirmed size of signage, material and structure ing will follow above design guild line.4'-0"3'-6"5'-0"4&#

16、39;-6 1/2"6" 5 1/2"7 1/2" 3/4"3'-2"3/4" 7 1/2"SIGN STRUCTURE SIZE AND PROCESS DESCRIPTION标识结构及工艺说明5'-0" OVERALL HEIGHT SIGN I.D.Message Panel1/8" THK. Aluminum sign face panel. Panel to be routed out for 1/2" thk. clear acrylic push thro

17、ugh HP Letters/Logo Forms.Paint to match (P2)Sign BodyFabricated aluminum sign cabinet. Paint to match (P3)Sign Reveal Frame3/4"x 3/4"x 1/8" Channel accent reveal frame. Paint to match (P1)Hewlett Packard Enterprise Logo Forms1/2" thk. clear acrylic push through logo and letter f

18、orms with 1/4" projection. Applied first surface opaque Green (to match (V1) vinyl on logo Element. When signs are internally illuminated, di user film applied second surface is required.Hewlett Packard Enterprise Letter Forms1/2" thk. clear acrylic push through logo and letter forms with

19、1/4" projection. Applied non-reflective vinyl opaque Black first surface on letters (to match (V4). When signs are internally illuminated, di user film applied second surface is required.Message Letters - AddressVinyl letters (Metric Semibold typeface), with non-reflective vinyl opaque Black on

20、 first surface(to match (V4).Structural Angle Frames1-1/2"x 1-1/2"x3/16" Structural aluminum angle frame. Note: Additional Horizontal Structural Angle Frames may be Required. Engineers/Sign Contractors to be responsible for integrity of sign structure.Structural Steel Post4"x 4&q

21、uot;x 1/4" thk. wall steel post.Concrete Footing3,000PSI concrete pier (1x) at Ø18" and 48" deep.16'-0"3'-0"3'-0"参照：HPE_SignFamily v1.5P367 1/2"2SECTION B346SECTION B5P131 1/2"3/4"677P2189871/8" Sign Face Panel1/8"CLCLElevation

22、- Sign Frame- Section B13Scale: 1"= 1'- 0"Scale: 3"= 1'- 0"#10 Hex Nut#10 Electrical Stud238754P3P1V4V13'-0"3'-0"Clearance Determined byOverall size of Panel & Expansion Table1/4" Projection3/8" Mill Depth1/2" thk. clear acrylic panel

23、logo/messages formsCL- Section APush-Through Logo/Message Panel42Scale: 1-1/2"= 1'- 0"Scale: 1:2根据最终确定的标识大小，等比例缩放标识结构，但材质，工艺不变。Structure size will be adjusted on scale base on the final confirmed size of signage, material and structure ing will follow above design guild line.SECTION AS

24、ECTION A5 1/2"4'-6 1/2"8 1/4"3'-2"8 1/4"3/47 1/2"1/2"1"MATERIAL AND COLOR SPECIFICATIONS材质和颜色规格ColorPMSCMYKRGBVinyl SpecificationsPaint Specifications *参照：HPE_SignFamily v1.5P12* SIGN PAINT TO BE AKZO NOBEL GRIPGUARD PLUS. COMPLETED IN AEROSPACE GRADE

25、APPLICATION (i.e. in three layers, including a UV resistant clear satin top coat or approved equivalent). Sign cabinet interiors can be painted bright white or be white mill finish (topcoat not required).*d by owner onlyNote: All vinyl to bed with its appropriate UV Overlaminate film (as recommended

26、 by 3M).V1* P1Opaque GreenP2Light Grey339-8006000179136Digitally Printed to Match PMS 339Satin Finish to Match PMS 339 C- Semi-glass, Akzo Brushed Aluminum- Semi-gloss, Akzo Nobel FLNA91373M Scotchcal 7725-12 BlackBlack3M Scotchcal 7725-10 WhiteWhite 3M Scotchcal 180C-120/7725-120 Satin Aluminum-3M Scotchcal 3630-121 Silver-Digitally Printed to Match PMS 339-Vinyl SpecificationsPaint to Match- Satin Finish, Applied Clear Coat- Satin finish, applied clear coatwith 0.25% Black Clear Coat3M Dual-Color Film 3635