规范和技术文件翻译指南船舶

1、第 1 章 通 则1.1 目的1.1.1本指南的主要目的是在于提高规范与技术文件的中文译 成英文 ( 中译英 ) 和英文译成中文 ( 英译中 ) 的翻译质量。1.1.2 通过本指南的应用, 力求在中国船级社 (CCS) 内逐步形成 CCS 规范与技术文件的统一译法, 避免在译文中造成不必要的误解。1.2 适用范围1.2.1 本指南所举例的英文基本用词、用语和有关表达方式, 适用于 CCS 规范和技术文件的中译英。1.2.2本指南所举例的国际海事组织 (IMO) 和国际船级社协会 (IACS) 文件中有关主要表达式的英译中, 适用于IMO/IACS 文件的翻译。1.2.3本指南中所述的规范包括

2、CCS 编写的规范和指南, 技术文件包括 IMO/IACS 文件及其他有关技术文件。1.2.4本指南也可供有关单位翻译国际海事技术文件作参考。1.3基本要求1.3.1应在理解原文的基础上进行翻译, 力求忠实原文。翻译中如遇到新技术或第一次出现的专业术语不易理解时, 可在该译文后加注原文为“(.)”。1.3.2译文还应符合中、英文的基本语法和习惯用法, 做到文字通顺, 并尽量采用已经惯用的译法以及专业术语。1.3.3翻译工作开始以前, 翻译人员应做好有关方面的准备工作, 包括了解原文的基本内容、收集有关资料、查找原文出处、阅读相关的专业文献等。1.3.4 翻译过程中, 翻译人员对本人不熟悉的或专

3、业性特别强的内容应及时与有关专业人员沟通。1.3.5 无论是翻译人员, 还是审核人员, 都应对整篇译文进行认真仔细的校对, 避免漏译、误译, 务求全文的译法统一, 确保译文质量。第 2 章 规范的翻译2.1 一般规定2.1.1 本章要求适用于 CCS 编写的各类规范、指南等 ( 简称 "规 范") 的中译英。除非另有说明, 本章要求也适用于 CCS 被授权编写的 法定的规则、导则等 ( 简称 "法规") 的中译英。2.1.2 中译英时, 首先应查对规范条文的来源, 尽可能采用或参照原文进行翻译。如拟翻译的内容无原有文本作参考, 则应同有关专业人员沟通,

4、确保译文的正确性。2.2 规范名称与篇章节的翻译2.2.1 规范名称(1) 规范等应译成:规范 Rules指南 Guidance Notes(2) 法规等应译成:法定规则 Statutory Regulations导则Guidelines(3) 规范的名称用于书名时, 所有字母应大写:示例 :海船法定检验技术规则TECHNICAL REGULATIONS FOR THE STATUTORY SURVEY OF SEA-GOING SHIP海上拖航指南GUIDANCE NOTES FOR TOWAGE AT SEA（4）规范等名称在条款中被引用时，则其每个单词的首字母应大写, 但介词和连接词除外

5、:例 1: 凡欲取得或保持本社船级的散装运输危险液体化学品货物的船舶, 除应满足本规范的要求外, 还应满足本社钢质海船入级与建造规范的有关要求。For those ships carrying dangerous liquid chemicals in bulk which are intended to be classed with the Society or to maintain the classification，in addition to the Rules，the requirements of the Rules and Regulations for the Const

6、ruction and Classification of Sea-going Steel ships of the Society are to be complied with.2.2.2 总则与篇章节的翻译篇、章、节的编号及名称(1) 总则、通则、一般规定等应译成:总则General通则General Provisions一般规定General Requirements一般要求General Requirements(2) 篇、章、节等的译法以及编排格式 篇、章、节等应译成 : 篇 PART章 Chapter节 Section 篇、章、节的编号及名称（a）篇的编号应译成英文，且字母全部大

7、写，章和节的编号仍采用阿拉伯数字。（b）篇、章、节的名称应全部大写。 在规范中应用条款时，应将本篇 译成 This PART本章 译成 this Chapter 本节 译成 this Section 规范的编排格式，按中文的编排格式翻译。2.3 助动词与语态2.3.1 助动词(1)“法规”中的“应”,译成“shall”；“规范”中的“应”,译成 “is(are) to”。例1: (法规) 系统装船后应进行试验，试验方法应取得主管机关的同意。On completion of installation on board，the system shall be tested according to

8、 the procedure approved by the Administration.例2: (规范) 系统装船后应进行试验，试验方法应取得本社同意。On completion of installation on board，the system is to be tested according to the procedure approved by the Society.(2) 规范中的“必须”译成 “must”,“严禁”一般译成“to be prohibited”例 1：客船每周应举行1次弃船演习和消防演习。每次演习中不必全体船员都参与,但是每一船员都必须按要求每月参加1次弃

9、船和消防演习。On passenger ships，an abandon ship drill and fire drill shall take place weekly. The entire crew need not be involved in every drill，but each crew member must participate in an abandon ship drill and a fire drill each month as required.例 2: 除了表示船舶、飞机或人员遇险外，严禁使用国际遇险信号以及任何与国际遇险信号可能相混的信号。The use

10、 of an international distress signal, except for the purpose of indicating that a ship, aircraft or person is in distress, and the use of any signal which may be confused with an international distress signal, are prohibited.(3) 规范中的”建议”,一般译成“it is recommended that .”例 1：建议阳极尽可能不装在高强度钢纵骨的面板上。It is r

11、ecommended that anodes be not fitted to face plates of higher tensile steel longitudinals.(4) 规范中的“允许”译成“it is allowed (permitted)”，含有本社或验船师“允许”之意的“可以”应译成“may”(而不是“can”)。例 1: 钢质船上的上层建筑、甲板室、舱口盖、舷梯等或局部部件允许使用铝合金材料等效代替本规范要求的船体结构钢。The use of aluminum alloy is permitted for superstructures, deckhouses, ha

12、tch covers, accommodation ladders, etc. or other local components based on equivalent strength instead of hull structural steel as required by the Rules.例 2: 露天干舷甲板以及上层建筑甲板和第一层甲板室甲板的舷墙或栏杆的高度应不小于1.0m 。当此高度影响船舶正常营运时，经本社同意可予以适当降低。但当将甲板设计成装运木材时，其舷墙高度应至少为1.0m。Bulwarks or guardrails on the exposed freeboa

13、rd and superstructure decks and first tier deckhouse deck are to be not less 1.0 m in height above such decks. With the consent of Society, the height may be suitably reduced if this height would interfere with the normal operation of the ship, but in ships intended for the carriage of timber deck c

14、argoes, the height of bulwarks is to be at least 1.0m.2.3.2 语态(l) 由于规范条款中的规定主要强调应采取的措施或需注意的事项，而不是执行者，所以译成英文时，常用被动语态，翻译时应注意主语的转换和谓语的选择。例 1: 对冰区航行船舶应考虑环境温度的影响。Where a ship is intended to navigate in ice, the effect of ambient temperatures is to be taken in consideration.例 2: 船体结构中，凡承受高应力的焊缝，应尽量避免采用固定垫

15、板连接。否则，应经本社同意，并保证准确的装配。The use of permanent backing bars in highly stressed welds in hull structures is to be avoided as far as possible. Where backing bars are unavoidable, special care is to be taken to ensure accurate fit-up and consent of the Society is to be obtained.（2）规范中被动语态常用的表达式很多，例如：provi

16、sion is to be made . 应对作出规定means is/are to be provided 应提供设施measures are to be taken 应采取措施attention is to be paid 应注意例 1：船底肋板、旁内龙骨上均应开流水孔，应采取措施能使水自船底的各个流水孔至吸口均能自由流通，其中考虑到泵的抽唧率。Drain holes ate to be cut in the floors and in side keelsons in way of the bottom. Provision is to be made for the free pass

17、age of water form all parts of the bottom to the suction, taking into accounts the pumping rates required.例 2：甲板货物装载区应设有保护和固定甲板货物的围护设施。Means are to be provided to enable deck cargoes to be adequately secured and protected in the cargo containment areas.例 3：采用钢质风雨密舱口盖的船舶，在不影响船舶安全和采取有效措施的条件下，经本社同意，对其舱

18、口围板高度可予以适当降低。For ships provided with steel weathertight hatchcovers, with the consent of the Society, the height of hatchway coamings may be reduced provided that efficient measures have been taken and that the safety of the ship id not impaired.例 4：如具有绝缘层的甲板上装载或使用车辆，则在根据甲板厚度确定用板的允许载荷时，应注意甲板变形对绝缘层的影

19、响。Where wheeled vehicles are stowed or used on insulated decks, when the permissible loading of decks is determined based on the thickness of decks, attention is to be paid to effect on insulated coating due to deck deformation.2.4 规范常用语与常用词2.4.1“适用于”be applicable to. 或 apply to .例 1：本节的规定适用于一般船体结构和

20、构件的焊缝设计，特殊构件将另行考虑。The provisions of this Section apply to the weld design for normal hull structures and components, special structures will be subject to individual consideration.2.4.2 “满足要求”与“符合规定”一般情况下，“满足要求” 译成 to comply with (或meet) the requirement，“符合规定”译成 to be in accordance/compliance with r

21、equirement。例 1: 在船中部0.5L区域内的长桥楼甲板作为强力甲板时，其船中剖面模数及最小厚度应满足本章 2.2.1及 2.4.2.1的要求。Where the long bridge deck within 0.5 L amidships is regarded as strength deck, the midship section modulus and minimum thickness of the deck plating comply with the requirements of 2.2.1 and 2.4.2.l of this is Chapter.例 2:

22、 结构直接计算的方法应符合本社船体结构直接计算指导性文件的规定。The methods of structure direct calculations are to be in accordance with the provisions in the Guidance Notes of Hull Structure Direct Calculation by Society.2.4.3 “另有规定”与“特殊考虑”（1） 除另有规定者外，Unless other stated/provided，. Except where otherwise stated/provided，.除另有明文规定

23、外，Unless expressly stated/provided otherwise，除第 5 章内另有明文规定者外，Except as expressly sated/provided in Chapter 5，.例 1: 除另有规定者外，本规定适用各型船舶的管系和舱室通风系统。The provisions of this Chapter apply to piping and ventilating system on all types of ships except where otherwise stated.例 2: 除另有规定者外，本篇适用于船长自 20m 至 300m 的焊

24、接的钢质海船。Unless otherwise stated，this PART applies to steel ships of all welded construction from 20m to 300m in length inclusive.（2）“将/可作特殊考虑”译成 will may be specially considered可另行考虑 may be subject to individual consideration 将作变通考虑 alternative arrangements will be considered例 1: 当角接的两个构件的厚度相差甚大时，则该角

25、焊缝的尺寸将予以特殊考虑。Where the difference in thickness between the abutting member and the table member is considerable, the size of fillet welds will be specially considered.例 2: 本节规定适用与一般船体结构和构件的焊缝设计, 特殊结构将另行考虑。The Section applies to the weld design for normal hull structure and components and special str

26、uctures will be subject to individual consideration.例 3: 对尾机型船舶，此种机座纵桁应尽可能地向尾延伸，且其端部应由强肋骨或实肋板支持。如尾部线型过于尖瘦，在尾尖舱舱壁后设过渡肘板有困难时，其布置可特殊考虑。In machinery spaces situated at the aft end，such engine seating girders are to be carried as far as practicable and the ends effectively supported by web frames or tran

27、sverse. Where it is impracticable to provide to transition brackets abaft the after peak bulkhead because the after-body of the ship is too fine, the arrangement may be specially considered.2.4.4 “提交本社批准”与“经本社验船师同意”（1）“提交本社批准” to be submitted to the Society for approval“提交本社供备查” to be submitted the

28、Society for reference/information/file例 1: 对所有船舶，应将下列图纸提交本社批准：For all ships, the following plans are to be submitted to the Society for approval:（2）“经本社或本社验船师同意”为subject to thee agreement/consent/sanction of the Society or the Surveyor或 with the agreement/sanction/consent of the Society or the Surve

29、yor“使本社验船师满意”为 to the satisfaction of the Surveyor2.4.5 “放宽要求”与“免除条款”（1）“放宽”可以用动词 relax 或名词 relaxation 来表示。例 1: 本章规定适用于本篇 1.1.12.1 规定的主推进和辅助机械的渐开线圆柱齿轮传动装置。对于功率分别小于 147kW 和 100 kW 的上述主推进和辅助机械的齿轮传动装置，本章个别条文要求可予适当放宽。The provisions of this Chapter are applicable to transmission gearing with cylindrical

30、gears of involute shape for main propulsion and auxiliary machinery installations as specified in 1.1.12.l of this PART. Where the transmitted powers of main propulsion and auxiliary installations are respectively less than 147 kW and 100 kW, the requirements of individual paragraphs of this Chapter

31、 may be properly relaxed.（2）“免除” 可以用动词 exempt.from .或 dispense with 或 waive 等表示。例 1: 对于500总吨以下的船舶，可免设本篇 3.3.3.1 所要求的舱底水应急吸口。For ships of less than 500 gross tonnage, emergency bilge suction specified in 3.3.3.l of this PART may be dispensed with.例 2: 对于通常不从事国际航行的船舶，在特殊情况下需要进行一次国际航行时，主管机关可免除本规则的任何要求，

32、但该船应符合主管机关认为适合其所担任航次的安全妥求。A ship which is not normally engaged on international voyages but which, in exceptional circumstances, is required to undertake a single international voyage may be exempted by the Administration from of the requirements of the present regulations provided that it complies

33、with safety requirements which are adequate in the opinion of the Administration for the voyage which is to be undertaken by the ship.2.4.6 其他（1） “定义” Definitions 在各种规范中经常应用，中文规范中有时用冒号“:” 有时用“系指”表示 , 译成英文的单词可为 is 或 means。在同一规范中建议采用统一的用词。例 1: 船宽B(m)：在船舶的最宽处由一舷的肋骨外缘量自另一舷的肋骨外缘之间的水平距离。Breadth B, in m ,

34、is the horizontal distance measured over the main frames at the widest part of the ships.例 2: 上层连续甲板系指船体的最高一层全通甲板。Upper continuous deck means the uppermost deck which extends from the stem to the stern.（2） 规范中英文字母的大写 机构、组织的名称以缩写形式出现时，字母全部大写:示例: 中国船级社 CCS国际船级社协会 IACS国际海事组织 IMO国际标准化组织 ISO 国际公约以缩写形式引用时

35、 , 则字母大写 :示例: 1974SOLAS 公约 SOLAS1974 73/78 防污公约 MARPOL73/78 告示牌、警告语飞出口等全部大写示例: 船离港前应关闭所有关闭装置ALL CLOSING DEVICES ARE TO BE COLSED BEFORE THE SHIP LESVES HARBOUR严禁吸烟 NO SMOKING出口（安全门） EXIT 专用名词中首字母大写:示例: 本社 the Society本社验船师 the Surveyor总部 the Headquarters主管机关 the Administration有特殊习惯写法的专用名词有：船旗国 the fl

36、ag State港口国 the port State2.5 数量2.5.1 数量表示（1）数字的翻译应严格按照中文原稿，做到准确无误。一般，19 的整数译成英文，除此以外的其他数字直接用阿拉伯数字表示。例 1: 对于船龄在 10 年及以上的载运危险货物的船舶，在货物区域内，选择 2 个与船体构成整体的处所，可包括双层底舱（如设有时），作为内部检查。For ships of 10 years of age and over carrying dangerous cargoes, internal examination of two selected spaces within the carg

37、o area, such spaces being integral with the hull which may include double bottoms, if fitted, is to be carried out.（2）但是，在下列情况下，英语译文中仍应使用阿拉伯数字表示。 国际单位或单位符号前的数字（如 : 长度、重量、速度、功 率、角度和温度等）例 1: 水线以下0.4 m0.4 m below the waterline例 2：速度至少3.5 m/sa velocity of at least 3.5 m/s例 3：输出功率355 kWa power output of

38、355 kW例 4：横倾角大于20ºan angle of heel greater than 20º例 5：在环境温度-30 at an ambient temperature of 30 例 6：速度3节的条件下at a speed of 3 knots 表示百分数、倍数、比率和一段时间（天、星期、月、年、分和秒等）例 1: 和一年前的14相比，仅为总额的4only 4% of the total, as compared with 14% the previous year例 2：不少于直径的4倍not less than 4 times the diameter例

39、3：含油量在百万分之5至8an oil content of between 5 and 8 per million例 4：在5分钟以内within a period of 5 min例 5：不迟于船员上船后的两个星期not later than 2 weeks after a crew member joins the ship例 6：每3个月一次once every 3 months（3）日期的表示按日、月至年的次序表示。其中月份采用字母拼写形式且不能缩写，而日和年的则用阿拉伯数字。例 1：对在货物运输中存在堆装和系固的现有船舶，在1996年7月1日以后应配备经本社批准的货物系固手册。Ex

40、isting ships where stowage and securing are adopted in cargo transportion are to be provided with a Cargo Securing Manual approved by the Society form 1 July 1996.（4）期限可有多种表示，一般，如有具体日期的可用before/after/from + 具体日期；没有具体日期的，则可用 the date of + 名词结构的形式来完成。例 1：经审批图纸的有效期，自图纸批准之日起至船舶开始建造（安放龙骨或类似建造阶段）之日应不超过4年。

41、The term of validity of the approved plans from the approval date of the plans to the date of commencement of construction of the ship (the keel of which is laid or which is at a similar stage of construction) is not to exceed 4 years.2.5.2 数量的比较（1）等量、小于和大于一般情况下，表示等量的可以用 of 表示，而and more (above/over)

42、的含义为及其以上。小于一般用 less than；大于一般用 more than。例 1：对船长在150m及以上的现有散装货船，最迟应在1997年7月1日之前按第2篇2.2.12.5的规定装备装载仪。Existing bulk carriers of 150 m and above in length are to be provided with a loading instrument before 1 July 1997, in accordance with the requirements of 2.2.12.5 of PART TWO.例 2：对经常作业于水深超过100m海域的渔船

43、，一般应设有深水抛锚装置，该装置可用钢索代替锚链。For fishing vessels usually operating at areas of more than 100 m in depth, deep-sea anchor gears are to be provided, for which steel wires may be used instead of chain cables.例 3：船长小于60m的船舶，其外板最小厚度应不小于5mm。For ships of less than 60 m in length, the minimum thickness of shell

44、 plating is not to be less than 5 mm.（2）不大于用 not more than；不小于用 not less than。例 1：消防水带的长度一般为15m，其直径应不小于38mm，但不大于65 mm。The hoses are to be 15 m in length and not less than 38 mm but not more than 65 mm in diameter.（3）文字中出现在两项之间“取较小者”或“取较大者”时，可译为 whichever is the lesser 或 whichever is the greater；如在两项

45、以上中“取最小者”或“最大者”时，则可译为 whichever id the least 或 whichever is the greatest。例 1：在螺母和承座之间应设垫圈，垫圈的尺寸应按下列格式计算：垫圈厚度0.13dg；垫圈外径0.13Du（Du见图3.1.8.5所示）或1.6dg，取大者。Rings are to be fitted between the nut and bearing carrier, and the scantlings of the rings are to be determined form the following requirements:The

46、thickness of the rings is to be not less than 0.13 dg;The external diameter of the rings is not be less than 1.3 Du(Du as shown in Fig.3.1.8.5) or 1.6dg, whichever is the greater.例 2：式中：s键、舵杆或承座材料的屈服应力，N/mm2，取最小者。Where: syield stress, in N/mm2, of material used for keys, rudder stock or bearing carr

47、ier, whichever is the least.（4）数量范围：两个数值之间则可用 to 表示；在某个数值之内的用 within 表示。例 1：舵杆与舵页间采用液压装配或冷缩配合无键锥形连接，具有直径为1:121:20的锥度。Where the hydraulic fitting or shrinking is adopted for the keyless cone connection of rudder stock and rudder blade, the taper of the cone frustum id to be on diameter 1:12 to 1:20.例

48、 2：在离车辆甲板450 mm 的高度内及在排气通风导管内，可安装合格防爆电气设备。Where it is fitted within a height of 450 mm above the car deck and exhaust ventilation trunking, electrical equipment is to be of certified safe type.2.6 公式、插图和表格2.6.1 公式公式的翻译应严格按照中文，并且注意其字母大小写、正斜体、上下标和括号、根号、分数等的写法。说明部分的“式中”一词应译为“where”，单位前用 in。例 1：支持甲板纵骨的强横梁剖面模数W应不小于按下式计算所得之值：W5Shl2 cm3 式中：S强横梁间距，m；h甲板的计算压头，m；按本节2.8.1.1 的规定；l强横梁跨距，m。The section modulus W of deck transverses supporting deck longitudinals is to be not less than that obtained form the following formula:W5Shl2 cm3 Where: Sspacing of deck transverse, in m； Hdesign hea