常用维修手册及维修文件介绍

1、STAGSTAGSTAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGSTAGCustomized ManualNon-Customized ManualAMMAIPCWDM (AWM, AWL)SSM (ASM)FIM (TSM)SRMSWPM (ESPM)SOPM (PMS)MPDNTMITEM (TEM)CML (Airbus)STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGSTAGAMM维护手册IPC图解零件目录WDM飞机线路图手册SRM结构修理手册MPD维护计划数据ITE

2、M工具设备图解手册SSM系统原理图手册CPM防腐手册NTM无损探伤手册SWPM标准线路施工手册OHM/CMM大修手册/部件修理手册BITE MANUALBITE手册STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGSTAGMyBoeingFleet: STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGSTAGDelta Web page: https:/ QUALITY DEPTFor Training Purposes Only Ver.1 STAGSTAGSTAG QUALI

3、TY DEPTFor Training Purposes Only Ver.1 STAGSTAGPage BlockPage TypePage TypePage BlockPage BlockDESCRIPTION AND OPERATION (D/O)DESCRIPTION AND OPERATION (D/O)1 99FAULT ISOLATION (FI)FAULT ISOLATION (FI)101-199MAINTENANCE PRACTICES (MP)MAINTENANCE PRACTICES (MP)201-299SERVICINGSERVICING301-399REMOVAL

4、/INSTALLATION REMOVAL/INSTALLATION 401-499ADJUSTMENT/TESTADJUSTMENT/TEST501-599INSPECTION/CHECKINSPECTION/CHECK601-699CLEANING/PAINTINGCLEANING/PAINTING701-799APPROVED REPAIRSAPPROVED REPAIRS801-899STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGSTAGAMTOSS (Aircraft Maintenance Task-Oriented S

5、upport System) / AMTOSS NumbersTASK 29-11-05-400-801-002STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGSTAGATA 100 ChapterAircraft General Group / 飞机概述05 TIME LIMITS/MAINTENANCE CHECKS 时限/维护检查06 DIMENSIONS AND AREAS 尺寸和区域07 LIFTING & SHORING 顶起与支撑08 LEVELING & WEIGHING 校水平和称重09 TOWING

6、 & TAXIING 牵引和滑行10 PARKING, MOORING, STORAGE & RETURN TO SERVICE 停放和系留11 PLACARDS AND MARKINGS 标牌和标记12 SERVICING 勤务Airframe Systems Group / 飞机机体系统20 STANDARD PRACTICES-AIRFRAME 标准实施-机身21 AIR CONDITIONING 空调22 AUTO FLIGHT 自动飞行23 COMMUNICATIONS 通讯STAG QUALITY DEPTFor Training Purposes Only Ver

7、.1 STAGSTAG24 ELECTRICAL POWER 电源25 EQUIPMENT/FURNISHINGS 设备/装饰26 FIRE PROTECTION 防火27 FLIGHT CONTROLS 飞行操纵28 FUEL 燃油29 HYDRAULIC POWER 液压30 ICE AND RAIN PROTECTION 防冰和防雨31 INDICATING/RECORDING SYSTEMS 指示/记录系统32 LANDING GEAR 起落架33 LIGHTS 灯34 NAVIGATION 导航35 OXYGEN 氧气36 PNEUMATIC 气动系统38 WATER/WASTE 水

8、/污水46 INFORMATION SYSTEMS 信息系统49 AIRBORNE AUXILIARY POWER 空运的辅助电源STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGSTAGStructure Group / 结构51 STANDARD PRACTICES AND STRUCTURES - GENERAL 标准施工与结构简介52 DOORS 舱门53 FUSELAGE 机身54 NACELLES/PYLONS 短舱/吊架55 STABILIZERS 安定面56 WINDOWS 窗57 WINGS 机翼STAG QUALIT

9、Y DEPTFor Training Purposes Only Ver.1 STAGSTAGPower Plant Group / 动力装置70 STANDARD PRACTICES - ENGINES 标准实施-发动机71 POWER PLANT 动力装置72 ENGINE 发动机73 ENGINE FUEL AND CONTROL 发动机燃油和控制74 IGNITION 点火75 AIR 空气76 ENGINE CONTROLS 发动机控制器77 ENGINE INDICATING 发动机指示78 EXHAUST 排气79 OIL 滑油80 STARTING 起动STAG QUALITY

10、 DEPTFor Training Purposes Only Ver.1 STAGSTAGPower Plant Group / 动力装置70 STANDARD PRACTICES - ENGINES 标准实施-发动机71 POWER PLANT 动力装置72 ENGINE 发动机73 ENGINE FUEL AND CONTROL 发动机燃油和控制74 IGNITION 点火75 AIR 空气76 ENGINE CONTROLS 发动机控制器77 ENGINE INDICATING 发动机指示78 EXHAUST 排气79 OIL 滑油80 STARTING 起动STAG QUALITY

11、DEPTFor Training Purposes Only Ver.1 STAGSTAGFunction Code000000RemovalRemoval100Cleaning200Inspection / Check300Correction / Repair400Installation500Material & Aircraft Handling600Servicing / Preserving / Lubrication700Testing / Checking800Miscellaneous900Change = Remove + InstallationSTAG QUAL

12、ITY DEPTFor Training Purposes Only Ver.1 STAGSTAGThe sequence number is used to provide a unique number when the first four elements are not unique.(a) The sequence number starts at 801 for tasks and continues through 999. If there are more than 200 tasks, the number continues with A01 through A99,

13、B01 through B99, etc.(b) The sequence number starts at 001 for subtasks and continues through 799.The configuration number is used to indicate an engine or page block configuration.(a) The first position is the engine prefix.(b) The second and third positions are the page block configuration.(c) If

14、the page block is not part of the engine chapters or does not have a CONFIG number (see effectively and configuration numbering), then the tasks and subtasks will not have this element.(d) If the page block is not part of the engine chapters but does have a configuration number, then the first posit

15、ion will have a zero and the last two will indicate the CONFIG number.STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGSTAGSTAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGSTAGSTAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGSTAG 如果已知件号，则由数码索引入手： 在数码索引中找到此件号，并记下对应的章、节、组件、图和项目号。 由图号可找到

16、相应的图解。 在图解中找到部件及项目号，并在清单中可找到相应的部件及相关的内容。 如果未知件号，则由目录内容表入手： 在预想到的章节中找到内容目录表。 参见零件所在的主组。 图是按主要名称的字母顺序列出的，找到零件最有可能被显示的图解标题，记下图号。 由图解和清单可找到相应的内容。STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGSTAGSTAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGSTAGSTAG QUALITY DEPTFor Training Purposes Only

17、 Ver.1 STAGSTAGSTAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGSTAG1. FIGURE NUMBER - The figure number identifies the illustration and the part list defining a specific portion of the aircraft coverage. The figure number appears in the illustration title, to the left of the first item number

18、in the FIGURE ITEM column at the top of each parts list page, and in the footing of each applicable page.2. ITEM NUMBER - The item number corresponds to the number on the part in the illustrations. A dash (-) preceding the item number indicates that the part is not illustrated. As noted in the Expla

19、nation of Customizing description, item numbers missing from parts list section but found on the illustration are not applicable.3. NEXT HIGHER ASSEMBLY (NHA) CROSS REFERENCE - The reference catalog location indicates where theused on component or assembly is defined.4. UNITS PER ASSEMBLY (UPA)- The

20、 quantity of the part which is used on the NHA assembly. The following entries other than a numeric value maybe found in the IPC data:RF (Reference) - Indicates the item is listed at the NHA location which carries the UPA quantity. The NHA location is found through the NHA cross reference (See 3.).A

21、R (As Required) - Indicates the part is used in a quantity determined at the time when the part is installed.STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGSTAG5. SUPPLIER CODE - The (5) digit code which identifies the manufacturer of the part. The Supplier Code is found in the nomenclature c

22、olumn following the supplier part number entry. The Supplier Code is extracted from the Cataloging Handbook H4/H8, Commercial and Government Entity (CAGE), the NATO Supply Code for Manufacturers (NSCM), or it is assigned by Boeing if not available from the CAGE or NSCM handbooks. The supplier name a

23、nd address corresponding to each Supplier Code is available in the Suppliers Name and Address Index.6. SPECIFICATION NUMBER and QUALIFIED PARTS - The Specification Number is a Boeing assigned number which defines all of the necessary part performance requirements a supplier must comply with to be qu

24、alified to produce the part. The Boeing Specification number is documented in the Part Number column when no supplier part has been qualified. When a supplier part qualifies to a Boeing Specification, the supplier part number is shown in the Part Number column and the specification is placed in the

25、Nomenclature column. Any additional qualified supplier parts are captured as optional parts in the nomenclature column.7. USED ON - A note in the Nomenclature column which indicates the appropriate next higher assembly when the part is not common to all of the next higher assemblies listed preceding

26、 the part.STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGSTAG8. FOR DETAILS SEE - A reference to another location where the installation or assembly is broken down in further detail to its component parts.9. POSITION DATA - Extra information defining where the part is installed. Typical infor

27、mation presented here includes station or zone location information or physical installed position information.10. ALTERED FROM - An existing component that was altered to create another part number. There are only minor modification differences between the original (Altered from) part number and th

28、e new part number.11. EFFECT TO FROM - Where a design change produces a qualified or limited interchangeability condition, the delivered effectivity is shown and an appropriate note is included in the nomenclature column to define this condition. The relationship between parts shown in interchangeab

29、ility notes is defined by the following terms:REPLACES OR REPL BY - Indicates the parts (or sets) are physically and functionally interchangeable.MAY USE - Indicates a one-way interchangeability exists, either forward or backward, depending on the parts involved.T/W (together with) - Indicates parts

30、 which are necessary to be replaced along with the main part for interchangeability. Interchangeability is only accomplished as specified by the note.STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGSTAG12. ILLUSTRATION REFERENCE - A reference note to the functionally related figure which defin

31、es the part(s). The part is drawn at this figure in phantom for identification of an Illustration Reference condition. Tubing and ducts are example uses for This reference.13. OVERLENGTH PART NUMBER - A Boeing Company Reference(BCREF) number is assigned to all overlength part numbers which exceed 15

32、 digits. The BCREF number is placed in the Part column and the overlength number is in the nomenclature column.PN UNASSIGNED - BCREF numbers are also assigned when there is no part number for a component. Thiscondition occurs for supplier or customer modification data.14. MAINTENANCE COMPONENTS OF A

33、SSEMBLIES - Disassembly sequence of intermediate subassemblies may not be included in the IPC if the intermediate subassemblies are not considered line maintenance components.TEMPORARY BREAKDOWN - A note which is included in the IPC when a design change produces an assembly part number for which bre

34、akdown information is not available. Breakdown components for the current assembly are extended as a applicable for the new assembly. The temporary breakdown note is removed when actual breakdown information is available and incorporated in the IPC.STAG QUALITY DEPTFor Training Purposes Only Ver.1 S

35、TAGSTAG15. ATTACHING PARTS - Attaching parts are listed immediately following the item which they attach. They are preceded by the phrase Attaching Parts and are followed by the symbol -*-.16. BOEING STANDARD PARTS - Boeing Standard Parts are identified by a BAC prefix. The Boeing Standard Part Numb

36、er appears in the part number column when no supplier part has yet been qualified. When an equivalent supplier part number is qualified, it will appear in the part number column and the Boeing Standard Part Number and any other equivalent supplier numbers will appear in the nomenclature column as op

37、tional parts If no supplier part numbers are included in the Parts List for a Boeing Standard, see the Boeing Standards Volumes (D-590), Boeing to Supplier Part Number Cross-Reference Index or the specific standards page for procurement source information.17. CHANGE INDICATORS - Change indicators ar

38、e applied opposite the revised data line entry. An R in the margin indicates the line opposite was added or revised in the current revision.When the Parts List page for a figure includes Airline Stock Numbers, the letter S is shown opposite the line entry When a change in the Airline Stock Number da

39、ta is the only Change to the item entry.STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGSTAG18. FUNCTIONALIZED COVERAGE - Certain items contain components which are illustrated and listed in various chapters according to their ATA Specification 100 function. The presence of this condition is i

40、ndicated by showing the figure location(s) for the functionalized coverage in the NOMENCLATURE column of the major installation or assembly line entry. In the example, the portion of the Door Instal- lation covering LIGHTS is displayed in the figure identified in Chapter 33. The portion covering NAC

41、ELLES/ PYLONS is shown in the figure identified in Chapter 54.19. BOEING PROPRIETARY COLOR CODED PARTS - Boeing Proprietary Color Coded Parts, excluding Boeing specification part numbers 10-XXXXX, SXXXNXXX, SXXXTXXX, SXXXUXXX, SXXXWXXX or 60BXXXXX, are identified with an alpha SP suffix. This entry

42、represents consolidation of all color codes applicable for the given usage. Color coded parts may be ordered with either the specific airline (alpha) color code suffix or the consolidated SP suffix. Orders received for SP parts will be converted and processed under the airlines (alpha) color coded p

43、art number. A reference to the appropriate aircraft registry number or the color name on orders for SP parts will facilitate the color conversion.Note: Color code does not affect physical or functional interchangeability aspects.20. LOCAL FABRICATION PARTS - Material requirements for parts which can

44、 be locally fabricated are included in the Nomen- clature column within a (MFD FROM-) note.STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGSTAG21. FIGURE TITLE - Where more than one lead entry or subject is included in a figure, a figure title is used to facilitate the preparation and maintena

45、nce of the Chapter Table of Contents entries. The Effectivity column for the figure title identifies the aircraft covered in the figure.22. COMPONENT MAINTENANCE MANUAL REFERENCE - The applicable Component Maintenance Manual providing detail coverage of an assembly is identified in a (REF CMM-) note

46、 in the Nomenclature column.For Supplier Assemblies the applicable supplier code is shown following the nomenclature of the part identified in the Part Number Column.23. SERVICE BULLETIN ENTRIES - Boeing Service Bulletins are incorporated in the IPC only upon notification from the airline that the i

47、ntent of the SB has been accomplished. Service Bulletin coverage is incorporated using one of the following methods as specified by the airline:Dual configuration reflects both the before and after Service Bulletin incorporation components in accordance with Spares Letter No. 309, Option 1.Single co

48、nfiguration reflects only the after Service Bulletin incorporation components in accordance with Spares Letter No. 309, Option 2.A record of the Service Bulletins submitted for incorporation in the IPC is shown in the Service Bulletin/Modification List.STAG QUALITY DEPTFor Training Purposes Only Ver

49、.1 STAGSTAG24. FILTER MAINTENANCE KITS - Boeing defines a kit part number which contains all of the parts necessary to support the removal and maintenance of a filter on the airplane. The kit is a convenience to the operator and contains the filter/module element(s), packing(s)/O-ring(s), gaskets an

50、d all standard parts necessary for maintaining the element. The filter Maintenance Kit part number is referenced in the nomenclature column of the element entry. The definition of the Filter Maintenance Kit contents are detailed in the Filter Maintenance Kit section of the IPC.25. ELECTRICAL EQUIPME

51、NT NUMBER - The Wiring Diagram equipment numbers are referenced in the IPC nomenclature as applicable to a documented part. Electrical Equipment Numbers also appear in the IPC on placards for identifying equipment.26. ETOPS ENTRIES - The IPC defines parts which are required to support Extended Twin

52、Operation (ETOPS) for two (2) engine aircraft. ETOPS notes appear in the nomenclature field of the IPC under the following conditions:Not Approved for ETOPS Means that part can not be installed to meet ETOPS flying requirements.Not Approved For ETOPS After Service Bulletin or Service Letter Incorpor

53、ation Means that the part is not certified for ETOPS if the referenced Service Bulletin or Service Letter is incorporated on the airplane.STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGSTAG27. MAINTENANCE MANUAL REFERENCE - A cross reference to the applicable Boeing Maintenance Manuallocation

54、 which contains the procedure for removal and repair of that part.EXPLANATION OF ILLUSTRATION TECHNIQUEThe illustration portion of a figure in the Illustrated Parts Catalog pictorially displays the relationship of the parts identified in the Parts List. The following is an explanation of certain tec

55、hniques used in the illustration to present the relationship of these parts. The numbers correspond to those shown in the following sample.1. Detail coverage of any portion of the illustration is provided by isolating sections in specific exploded views with alphabetic designations.2. Components of

56、assemblies are shown either within a specific exploded view of the assembly or the item numbers of the components are included within a bracket which is identified by the item number of the assembly.3. When a component is physically illustrated such that a lead line from the item number within a bra

57、cket to the illus- tration of the part would be confusing or indeterminate, an arrow is used to point in the direction of the illustrated component.4. Alternate configuration are indicated by a dual-headed arrow relating the illustration of the configuration involved.STAG QUALITY DEPTFor Training Pu

58、rposes Only Ver.1 STAGSTAGGENERAL SYSTEM OF ASSEMBLY ORDER-DETAILED PARTS LIST (DPL)The indenture system used in the Parts Lists of the figures included within this catalog shows the relationship of one part to another. For a given item, the number of indentures defines the relationship of the item

59、to the associated installation, next higher assembly, or components of the item as follows:STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGSTAGSTAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGSTAG查找WDM的方法：1. 已知Equipment Number, Wire Number, 根据Equipment List 或 Wire List 索引到相应的电路图。2. 未知Equi

60、pment Number, Wire Number, 则需要设备所属章节，功能在WDM上找到相应的电路图。以Wire Number W0018-0001-22 和Equipment Number C1434为例。STAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGSTAGSTAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGSTAGSTAG QUALITY DEPTFor Training Purposes Only Ver.1 STAGSTAGSTAG QUALITY DEPTFor Training Purposes