精品资料（2021-2022年收藏）建筑结构加固工程施工质量验收规范目次2010.8

1、目 次1总则12术语2 2.1一般术语2 2.2材料术语3 2.3施工术语53基本规定64材料9 4.1混凝土原材料9 4.2钢材10 4.3焊接材料13 4.4结构胶粘剂13 4.5纤维材料16 4.6水泥砂浆原材料18 4.7聚合物砂浆原材料19 4.8裂缝修补用注浆料20 4.9混凝土用结构界面胶（剂）21 4.10结构加固用灌浆料22 4.11锚栓245混凝土构件增大截面工程26 5.1一般规定26 5.2界面处理27 5.3新增截面施工28 5.4施工质量检验296局部置换构件混凝土工程32 6.1一般规定32 6.2卸载的实时控制32 6.3混凝土局部剔除及界面处理33 6.4置换

2、混凝土施工34 6.5施工质量检验357混凝土构件绕丝工程37 7.1一般规定37 7.2界面处理37 7.3绕丝施工38 7.4施工质量检验398混凝土构件外加预应力工程41 8.1一般规定41 8.2制作与安装42 8.3张拉施工43 8.4施工质量检验469外粘或外包型钢工程48 9.1一般规定48 9.2型钢骨架制作48 9.3界面处理49 9.4型钢骨架安装及焊接50 9.5注胶或注浆施工51 9.6施工质量检验5210外粘纤维复合材工程54 10.1一般规定54 10.2界面处理55 10.3纤维材料粘贴施工56 10.4施工质量检验5811外粘钢板工程60 11.1一般规定60

3、11.2界面处理60 11.3钢板粘贴施工61 11.4施工质量检验6312钢丝绳网片外加聚合物砂浆面层工程64 12.1一般规定64 12.2界面处理64 12.3钢丝绳网片安装65 12.4聚合物砂浆面层施工66 12.5施工质量检验6713砌体或混凝土构件外加钢筋网-砂浆面层工程70 13.1一般规定70 13.2界面处理70 13.3钢筋网面层施工71 13.4施工质量检验7214砌体柱外加预应力撑杆工程74 14.1一般规定74 14.2界面处理75 14.3撑杆制作76 14.4撑杆安装与张拉78 14.5施工质量检验7915钢构件增大截面工程80 15.1一般规定80 15.2界

4、面处理80 15.3新增钢部件制作81 15.4新增钢部件安装、拼接施工83 15.5施工质量检验8516钢构件焊缝补强工程87 16.1一般规定87 16.2焊区表面处理87 16.3焊缝补强施工89 16.4焊接质量检验9017钢结构裂纹修复工程92 17.1一般规定92 17.2焊缝补强施工及质量检验9218混凝土及砌体裂缝修补工程95 18.1一般规定95 18.2界面处理95 18.3表面封闭法施工96 18.4柔性密封法施工98 18.5压力注浆法施工99 18.6施工质量检验10019植筋工程102 19.1一般规定102 19.2界面处理103 19.3植筋施工104 19.4

5、施工质量检验10520锚栓工程106 20.1一般规定106 20.2锚栓安装施工106 20.3施工质量检验10821灌浆工程110 21.1 一般规定110 21.2 施工图安全复查110 21.3 界面处理111 21.4 灌浆施工112 21.5 施工质量检验11422建筑结构加固工程竣工验收115附录A 建筑结构加固子分部工程、分项工程的划分117附录B 质量验收记录118附录C 高压水射流技术应用规定121附录D 加固材料、产品进场复验抽样规定123附录E 粘结材料粘合加固材与基材的正拉粘结强度 试验室测定方法及评定标准124附录F 结构胶粘剂抗冲击剥离能力测定方法及评定标准130

6、附录G 结构胶粘剂不挥发物含量测定方法134附录H 结构胶粘剂湿热老化性能测定方法137附录J 结构胶粘剂湿热老化性能现场快速复验方法及评定标准140附录K 结构胶粘剂初粘度测定方法144附录L 结构胶粘剂触变指数测定方法148附录M 碳纤维织物中碳纤维K数快速判定方法150附录N 纤维复合材层间剪切强度测定方法152附录P 锚固型结构胶及聚合物砂浆浇注体劈裂抗拉强度测定方法157附录Q 结构加固用砂浆体和灌浆料浆体抗折强度测定方法161附录R 聚合物砂浆及复合砂浆拉伸抗剪强度测定方法165附录S 结构用界面胶（剂）剪切粘结强度测定方法及评定标准169附录T 现场推定新增混凝土强度的取样规则与

7、评定方法175附录U 粘结材料粘合加固材与基材的正拉粘结强度 现场测定方法及评定标准177附录V 承重构件外加砂浆面层抗压强度采用回弹法检测的规定182附录W 锚固承载力现场检验方法及评定标准184附录Y 钢筋阻锈剂应用规定189本规范用词说明192引用标准名录193条文说明195Contents1General Provision2Terms 2.1General Terms 2.2Material Terms 2.3Construction Terms3Basic Requirement4Materials 4.1Concrete Materials 4.2Steels 4.3Weldin

8、g Materials 4.4Structural Adhesives 4.5Fiber reinforced Polymers 4.6Cements and Sands 4.7Polymer Mortars 4.8Crack Repairs with Injections 4.9Interface Adhesives for Concrete 4.10Grouts for Structural Strengthening5Strengthening with Enlarged Concrete Sections 5.1General Requirement 5.2Interface Trea

9、tment 5.3Enlarge Concrete Section 5.4Inspection of Construction Quality6Strengthening with Replaced Local Low-Strength Concrete 6.1General Requirement 6.2Real-time Control for Unloading 6.3Surface Treatment of Concrete 6.4Replacement of Concrete 6.5Inspection of Construction Quality7RC Elements Stre

10、ngthened with Wrapped Wires 7.1General Requirement 7.2Surface Treatment 7.3Wrapping with Wires 7.4Inspection of Construction Quality8RC Member Strengthened by Externally Applied Pre-stress 8.1General Requirement 8.2Fabrication and Installation 8.3Pre-stredding Tension 8.4Inspection of Construction Q

11、uality9Strengthening by Externally Bonded or Wrapped Shaped Steel 9.1General Requirement 9.2Fabrication of Steel Skeleton 9.3Surface Treatment 9.4Installation and Welding of Steel Skeleton 9.5Injection of Grouts 9.6Inspection of Construction Quality10Strengthening by Externally Bonded Fiber Reiforce

12、d Polymers 10.1General Requirement 10.2Surface Treatment 10.3Bonding of Fiber Reinforced Polymers 10.4Inspection of Construction Quality11Strengthening by Bonding Steel Plates 11.1General Requirement 11.2Surface Treatment 11.3Bonding of Steel Plates 11.4Inspection of Construction Quality12Strengthen

13、ing by Polymer Mortars Reinforced with Steel Wire Mesh 12.1General Requirement 12.2Surface Treatment 12.3Installation of Steel Wires 12.4Application of Polymer Motars 12.5Inspection of Construction Quality13Strengthening Concrete or Masonry Members by Steel Bar Mesh and Mortars Layer 13.1General Req

14、uirement 13.2Surface Treatment 13.3Application of Steel Bar Meshes 13.4Inspection of Construction Quality14Strengthening Masonry Columns with Prestressed Rods 14.1General Requirement 14.2Surface Treatment 14.3Fabrication of Rods 14.4Installation and Stress of Rods 14.5Inspection of Construction Qual

15、ity15Strengthening Steel Members with enlarged section 15.1General Requirement 15.2Surface Treatment 15.3Fabrication of Steel Elements 15.4Installation and Connection of Steel Elements 15.5Inspection of Construction Quality16Strengthening Welds in Steel Structures 16.1General Requirement 16.2Treatme

16、nt of Welding Surface 16.3Strengthening of Welding 16.4Quality Inspection of Welding17Repair Cracks in Steel Structures 17.1General Requirement 17.2Strengthening of Welds and Quality Inspection18Repair Cracks in Concrete and Masonry Structures 18.1General Requirement 18.2Surface Treatment 18.3Seal C

17、rack Surfaces 18.4Fill cracks with flexible Materials 18.5Inject Cracks with Epoxy 18.6Quality Inspection19Bonded Rebars 19.1General Requirement 19.2 Surface Treatment 19.3Installation of Bonded Rebars 19.4Quality Inspection of Construction20Anchors 20.1General Requirement 20.2Installation of Anchor

18、s 20.3Quality Inspection21Grouts 21.1General Requirement 21.2Review of Construction Drawings 21.3Surface Treatment 21.4Application of Grouts 21.5Quality Inspection22Acceptance of Building Structure Strengthening EngineeringsAppendix ADivision of sub-projects in Structural Strengthening EngineeringsA

19、ppendix BRecords of Quality InspectionAppendix CTechnical Specification for High-Pressed Water FlowAppendix DSample Specification for Re-inspection of Materials for StrengtheningAppendix ESpecifications for Test and Evaluation of Bonding Tensile Strength between Strengthening Material and SubstrateA

20、ppendix FSpecifications for Test and Evaluation of Debonding Performance of Structural Adhesives under T-Peel ImpactsAppendix GTest of Non-volatile Matter of Structural AdhesivesAppendix HTest of Durability Performance of Structural Adhesive under Circles of Wet and HeatAppendix JQuick Test on Site

21、of Durability Performance of Structural Adhesive under Circles of Wet and HeatAppendix KTest Method of Initial ViscosityAppendix LDetermination of Thixotropy Index of Structural AdhesiveAppendix MQuick Determination of K Number of Carbon FiberAppendix NTest Methods of Interface Shear Strength of Fiber Reinforced PolymersAppendix PTest Method of Split Tensile Strength of Anchoring