门禁系统维护手册(完成版7月26日)

1、Operation and Maintenance Manual(Access Control System)维 护 操 作 手 册（门禁系统）Project Name: Andreas Stihl Powertools(QingDao) New Plant项 目 名 称: 安德烈斯蒂尔动力工具（青岛）有限公司新建厂房Construction Company: Shanghai Changjiang Züblin JV施 工 单 位： 上海长江旭普林建筑工程有限公司Submitted by:编 制 单 位：Date:日期： Table of Contents目 录1.0 Genera

2、l Description of Project工程概况 2.0 General Description of Systemt系统描述3.0 Notices during Installation安装时注意事项4.0 Operational and Maintenace Specifications操作维护说明5.0 Trouble Shooting常见问题及解决办法6.0 Liaison Method厂家联系方式Maintenance Manual维护手册1. General Description of Project工程概况：Project name ： Andreas Stihl Po

3、wertools (Qingdao) Co., Ltd. New Production Project项目名称: 安德烈斯蒂尔动力工具青岛有限公司新建厂房项目Employer： Andreas stihl Powertools (Qingdao) Co., Ltd.业主： 安德烈斯蒂尔动力工具（青岛）有限公司General contractor： Changjiang zublin JV总包方： 上海长江旭普林建筑工程有限公司Subcontractor: The Fourth Construction Co., Ltd. of China Electronics System Engineer

4、ing专业承包公司： 中国电子系统工程第四建设有限公司Scope of Contract: Access control System承包内容： 门禁系统。Started: Apr. 1, 2006 Completed: Jun. 21, 2006工程开竣工日期： 2006-4-1至2006-6-212. General Description of the System系统描述In this project, Australia New Concept 5000 access control system is adopted, of which the hardwares are impo

5、rted from Australia, the mode is advanced secondary management mode, the main controller is equipped with 32-byte microprocessor and the basic memory is 2M flash memory expandable to 8M. All modules have inner control chips and can work independently without any influence to each other when malfunct

6、ion occurs, and they use the factory codes instead of DIP switch as module code (soft address code), improving the security level of the whole system. The system adopts a kind of communication mode mixing RS485 and TCP/IP, with RS485 used between main controllers and sub-controllers, and its communi

7、cation speed can reach to 19200 baud rate. The sytem can operate completely independent of computers and can be controlled through management software on the desktop by system manager. In addition, all modules of the system are internally equipped with RS232 serial interface, which faciliates the up

8、grade of the system through Internet and the interlocking intergration to other systems. The interlocking can be achieved independent of computers. This system is compatible with all standard Weigen card readers or other input devices like finger mark, hand shape, iris, etc. and can automatically id

9、entify information of different cards. The modularizedly designed system is integrated with access control and time control systems and can be re-developed. According to the customers requirements, different modules can be configured in the system, which embodies the flexibility of the system.本工程中门禁

10、系统采用澳洲新概念5000门禁系统，新概念GENESIS门禁控制系统硬件部分全从澳洲原装进口，系统采用先进的二级管理模式，主控制器本身内置32位微处理器，并采用2M的闪存作为基础内存（可扩展成8M）。系统所有模块均内置控制芯片，各模块在系统出现故障时可独立的进行工作，互不干扰。同时，系统的所有模块采用目前出厂代码代替DIP开关作为模块编码（软地址码），使系统的保安系数得到大大地提高。系统采用RS485与TCP/IP混合型的通讯方式，主控制器与分控模块之间采用RS485通讯方式，网络的通讯速率高达19200波特率，系统可以完全脱离于电脑独立运行。系统管理者通过桌面管理软件对系统进行管理。 同时新

11、概念GENESIS门禁控制系统的所有模块都内置RS232通讯串口，方便用户利用互联网对系统进行升级，同时也方便用于本系统与其他系统的联动集成，而且联动可以完全脱离电脑实现。系统可与各种标准韦根输出的读卡器或输入设备（指纹、掌型、虹膜）兼容，并自动识别各种不同的读卡信息。系统采用模块化设计，集门禁、考勤智能化控制于一体，可对产品进行二次开发，可根据客户的实际需求配置不同的模块，体现了系统的灵活性。The American HID card reader has stable performance, great versatility and can match with various acc

12、ess control system, and it, sealed in a box made from poly carbonic aci, is weather proof and can bear damaging force. It is connected with Weigen protocol control system, and can identify up to 85-byte and more than 1352 billion codes. It is characterized by versatility, easy to install and high se

13、curity level.工程中门禁读卡器采用美国HID产品，该读卡器性能稳定，通用性好，可以很好的与多种门禁系统匹配。读卡器封装于牢固的聚碳酸脂盒内，可经受日晒雨淋，抵御恶劣环境，不易遭破坏。同时可与所有现有的韦根协议控制系统相连接。可辨别高达85位的格式以及超过1352亿个不同的代码。具有通用性、易于安装、安全性高的特点。In this project, 25 access control points and 6 time control points are set up in the access control system, please refer to the attache

14、d drawings for detailed locations and working principles.本工程中门禁系统共计25个门禁点，6个考勤点，详细位置及系统原理见附图3. Notices During Installation安装注意事项： Basic requirements:本系统环境要求：Access controller: temperature: 045; humidity: 15%85%, and shall be installed in the room where card reader module is also installed.门禁控制器： 温度范

15、围：045; 湿度范围：15%85%;安装于读卡模块对应的室内，Card reader: temperature: -30°-65°C; relative humidity: 0-95%; 读卡器: 温度范围： -30°至65°C; 湿度范围：相对湿度0-95%，非凝结1 Special RS485 comprehensive wiring and concentration line are adopted in the system.系统采用专用RS485网络布线，连接方式为总线制2 Each access control module have i

16、ndependent power supply, and sharing the same power supply with other modules shall be avoided.每各门禁模块采用独立的供电系统供电，避免同其它现场模块共用电源。3 Star connection method shall be avoided in this system, and concentration line shall be adopted if the distance is so far.系统避免采用星型连接，当网络距离过长时用总线连接方式。4 The main control mod

17、ule shall be the first module rather than the central one in the system, and the terminal of the last module must be closed with the close resistance bigger than 180 ohm.系统的主控模块处于系统的第一个模块，不能连接在系统的中间。系统中的最后一个模块的网络连接端必须闭合，闭合电阻大约为180欧姆.5 The power of electrical lock cannot be larger than the allowed on

18、e by relay contact (contact current less than 2A), if it is beyond the allowed range, central relay shall be added.电锁的功率不能大于控制的继电器触点的允许功率(触点电流不大于2A),如电锁功率大于允许的范围需加中间继电器来控制.6 In principle, the system doesnt support grounding, which may affect the stability of the system by external disturbance.系统原则上不

19、支持接地,系统接地后可能会串入干扰而影响系统的稳定. 4. Operational and Maintenance Specifications:操作维护说明After completion of installation and commissioning of access control system, the hardwares are basically free from maintenace, and the manager just needs to operate and set up the software.门禁系统安装、调试完毕后，系统硬件基本处于免维护状态，管理者只要进行软件操作及设置即可。Please refer to the attached Instruction to New Concept Software for details.软件使用说明详见附本新概念一卡通软件使用手册5. Trouble