机床刀具设计外文文献翻译中英文翻译

1、英语原文：design of tool machine prop research significancethe original knife machine control procedures are designed individually, not used tool management system, features a single comparison, the knife only has to find the tool knife, knife positioning the shortest path, axis tool change, but does not

2、 support large-scale tool. automatic knife in the knife election, in the computer memory knife-election on the basis of using the siemens 840 d features, and the election procedures knife more concise, and complete the space daotao view. atc use the knife rapid completion of step-7 programming, and

3、have been tested in practice. in the positioning of the knife, plc controlled modular design method, which future production of similar machines will be very beneficial, it is easy to use its other machine. automatic tool change systems will be faster growth, reduced tool change time, increase the p

4、ositioning accuracy tool is an important means to help nc technology development. tool and inventory components of modern production is an important link in the management, especially for large workshop management. the traditional way of account management, and low efficiency, high error rate, and n

5、ot sharing information and data, tools and the use of state can not track the life cycle, are unable to meet the current information management needs. with actual production, we have to establish a workshop tool for the three-dimensional tool storage system to meet the knife workshop with auxiliary

6、storage and management needs. the system uses optimization technology, a large number of computer storage inventory information, timely, accurate, and comprehensive tool to reflect the inventory situation. the entire system uses a graphical interface, man-machine dialogue tips from the chinese menu,

7、 select various functions can be realized and the importation of all kinds of information. management system using online help function. through the workshop management, network management and sharing of information. have automated inventory management, warehousing management tool, a tool for the ma

8、nagement and statistical functions.1.system components and control structurethe entire system, including the structure and electrical machinery control systems.1.1.1mechanical structure and working principletool from the stent, drive, drive system, turret, shielding, control system, and electrical c

9、omponents. support from the column, beam, the upper and lower guide central track, and track support component. 1) drive for the system chosen vvvf method. cone used brake motors, with vvvf by cycloid reducer through sprocket drive. 2) drag a variable frequency drive system and control technology. v

10、vvf adopted, will speed drive shaft in the normal range adjustment to control the speed rotary turret to 5 30mm in, the drive shaft into two, two under through sprocket, the two profiled rollers chain driven rotating shelves. expansion chain adopted by the thread tight regulation swelling, swelling

11、the regular way. - conditioned, under the same chain-of-conditioning, so that the chain of uniform. 3) turret and shields the entire total of 14 independent turret. 13 of them as a socket-turret, as a drawer-turret, each turret back through the pin and, under the conveyor chain link chain plate, ins

12、talled at the bottom roller, chain driven rotating turret rotation along the track. outlet-turret and bt50-bt40 turret turret two kinds of forms. to strengthen management, security, landscaping modeling, shelf peripherals and shields. turret-drawer drawer placed at six other des voeux a knife, can b

13、e categorized with some of knife auxiliary equipment, such as bits, such as turning tools.1.1.2.electrical control systemthis tool storage systems is the main electrical control their shelves for operational control and position control. operational control equipment, including operation of the star

14、t of braking control. position control is the main location and address of the shelves for testing. control system as shown in figure 1.图 1 tool control system for the1) electric transmission horizontal rotary tool storage systems are the mechanical movements are repeated short-term work system. and

15、 the run-time system needs some speed, speed transmission needs, the system will use vvvf method can be used simple structure, reliable operation of the motor and frequency inverter. 2) control of the system is divided into two kinds of manual control and automatic control, manual control as a gener

16、al reserve and debugging methods of work; ways to the system control computer (ipc) and the control unit (inverter contactor , etc.) consisting of a control system. 3) location and positioning accuracy of the system automatically identify the site and location using a detection device as proximity s

17、witches, relays through the plate-point isolation and the number plate recorded close to the switching signal acquisition and operation of hutchison with a optimal path addressable identify the current location and shelves of the purpose of the shelf location. in order to enable a more accurate posi

18、tioning system, adopted two photoelectric switches, to detect the two shelves of the two films.1.2.the functions of the knifeknife the is the role of reserves a certain number of tools, machine tool spindle in hand to achieve the fungibility a disc cutter knife is the type of library, the chain kniv

19、es, and other means, in the form of the knife and capacity according to the machine tool to determine the scope of the process.1.3.common typesthe knife is a tool storage devices, the common knife mainly in the following forms: (1) the turret knife including the first level turret vertical turret an

20、d the first two, see figure 2.6 a) and b):(2) the disc cutter disc knife in the library with discoid knife, cutting tool along see how vertical arrangement (including radial and axial from knife from knife), along see how radial array into acute or arranged in the form of the knife. simple, compact,

21、 more applications, but are ring-cutter, low utilization of space. figure 2.7 a) to c). if the knife storage capacity must be increased to increase the diameter of the knife, then the moment of inertia also increased correspondingly, the election campaign long knife. tool number not more than 32 gen

22、eral. cutter was multi-loop order of the space utilization knife, but inevitably given the knife from complex institutions, applicable to the restricted space machine tool storage capacity and more occasions. two-disc structure is two smaller capacity knife on both sides of the sub-spindle place, mo

23、re compact layout, the number of certificates corresponding increase knife, apply to small and medium-sized processing center.(3) the chain knife   including single-and multi-ring chain ring chain, chain link can take many forms change, see figure 2.8 a) to c), the basic structure shown in figu

24、re 2. 8 do features: knife apply to the larger capacity of the occasion, the space of the small number of generally applicable to the tool in the 30-120. only increase the length of the chain tool will increase the number should not be increased circumferential speed of its moment of inertia of the

25、knife does not increase the disc as large.(4) linear combination knife and the knife library the linear knife simple structure in figure 2.9, tool single order, the capacity of small knife, used for cnc lathe and drill press on. because the location of fixed knife, atc completed action by the spindl

26、e without manipulator. the cutter knife is generally the turret combination turret with a combination of the disc cutter knife and the chain combination. every single knife the knife certificates of smaller, faster tool change. there are also some intensive drum wheel, and the lattice-type magazine

27、for the knife, the knife-intensive though. small footprint, but because of structural constraints, basically not used for single processing center, the concentration used for fms for the knife system.1.4 tool storage capacitytool storage capacity of the first to consider the needs of processing, fro

28、m the use of point of view, generally 10 to 40 knives, knife will be the utilization of the high, and the structure is compact.1.5 tool options(1) choose to order processing tool according to the order, followed add to the knife every knife in the block. each tool change, the order of rotation of a

29、cutter knife on location, and remove the need knives, has been used by the cutter knife can be returned to the original block, can also order add block, a knife. however, as the knife in the tool in different processes can not be repeated use of the knife must increase the capacity and lower utiliza

30、tion rate. (2) most of the arbitrary choice of the current system of using arbitrary nc election knives, divided into daotao coding, coding and memory-cutter, three. daotao coding tool code or knives or daotao need to install the code used to identify, in accordance with the general principle of bin

31、ary coding coding. tool knife election coding method uses a special knife handle structure, and each of the coding tool. each of the tool has its own code, thereby cutting tool can be in different processes repeatedly used, not to replace the tool back at the original knife, the knife capacity can b

32、e reduced accordingly. memory-election this paper knife, in this way can knives and knife in the position corresponding to the daotao memory of the plc in the nc system, no matter which tool on the inner knife, tool information is always there in mind, plc . on the knife with position detection devi

33、ces, will be the location of each daotao. this tool can be removed and sent back to arbitrary. on the knife is also a mechanical origin, every election, the nearest knife selection. 1.6. control of the knife   (1) the knife as a system to control the positioning axis. in the ladder diagram in a

34、ccordance with the instructions for computing t code comparison of the output angle and speed of instructions to the knife the knife servo drive servo motor. tool storage capacity, rotation speed, and / deceleration time, and other system parameters can be set in such a manner free from any outside

35、influence positioning accurate and reliable but the cost is higher.   (2) knife from the hydraulic motor drives, fast / slow the points, with proximity switches count and positioning. in comparison ladder diagram of the current storage system knife (knife spindle) and goals knife (pre-knife) an

36、d computing, then output rotation instructions, judging by the shortest path rotation in place. this approach requires sufficient hydraulic power and electromagnetic valve knife the rotational speed can be adjusted through the throttle. but over time may be oily hydraulic, oil temperature and enviro

37、nmental factors impact the change in velocity and accuracy. not generally used in large and medium-sized machine tool change frequently.   (3) the knife from ac asynchronous motor driven cam mechanism (markov institutions), with proximity switches count, which means stable operation, and genera

38、lly accurate and reliable positioning cam used in conjunction with a mechanical hand, atc fast-positioning.2. atc, the main types, characteristics, and the scope of application2.1 auto rotary toolrotary tool automatically on the use of cnc machine tool is a simple installation of automatic tool chan

39、ge, the quartet and 47.60 turret tool various forms, such as rotary turret were installed on four, six or more of the tool , nc instructions by atc. rotary tool has two vertical and horizontal, relatively simple structure, applicable to economic cnc lathe. rotary tool in the structure must have good

40、 strength and stiffness, resistance to bear rough cutting tool in the cutting force and reduce the role of deformation and improve processing accuracy. rotating tool to choose reliable positioning programme structure and reasonable position, in order to ensure that each rotary turret to a higher pos

41、ition after repeated positioning accuracy (typically 0.001 to 0.005mm). figure 2.1 shows the spiral movements of the quartet turret.auto rotary tool in the simplest of atc, is 180 º rotary atc devices, as shown in figure 2.2 atc instructions received, the machine control system put atc spindle

42、control to the designated location at the same time, the tool movement to the appropriate location, atc, with the rotary axis and at the same time, the knives matching tool; drawbars from spindle cutting tools rip, atc, will be the tool from their position removed; atc, 180 º rotary tool spindl

43、e and the tool and tool away; atc, the rotary at the same time, the tool refocusing its position to accept spindle removed from the cutting tool; next, atc, will be replaced with the cutter knives were unloaded into the spindle and tool: finally, back to the original atc, "standby" positio

44、n. at this point, atc completed procedures to continue to run. this atc, the main advantage of simple structure, the less movement, fast tool change. the main disadvantage is that knives must be kept in parallel with the axis of the plane, and after the home side compared to the tool, chip and liqui

45、d-cutting knife into the folder, it is necessary to the tool plus protection. cone knife folder on the chip will cause atc error, or even damage knife folders, and the possibility of spindle. some processing centre at the transfer, and the tool side. when the atc command is called, the transfer-cutt

46、er knives will be removed, the machine go forward, and positioning with the atc, in line with the position. 180 º "rotary atc devices can be used horizontal machine, can also be used for vertical machining centers.2. 2 atc head-turret installedwith rotating cnc machine tool often used such

47、 atc devices, with a few turret head spindle, each with a spindle on both knives, the first tower interim process can be automatic tool change-realization. the advantage is simple structure, tool change time is short, only about 2 s. however, due to spatial constraints, the number of spindle can not

48、 be too much, usually only apply to processes less, not to high precision machine tools, such as the nc drill, such as cnc milling machine. in recent years there has been a mechanical hand and the turret head with a knife for the automatic tool change atc devices, as shown in figure 2.3. it is in fa

49、ct a turret head atc, and the knife-atc device combination. the principle is as follows:5 turret on the first two tool spindle 3 and 4, when using the tool spindle 4 processing tool, the manipulator 2 will be the next step to the need for the tool does not work on the tool spindle 3 until after the

50、completion of this process , the first rotary turret 180 º, atc completed. atc most of their time and processing time coincidence, the only real tool change time turret transposition of the first time, this approach mainly used for atc and nc nc drilling file bed.2. 3.daidao system for the auto

51、matic tool changefigure 2.4 shows the knife and the whole machine tool cnc machine tools for the appearance of fig.   figure 2.5 shows the knife and split-type machine to the appearance of cnc machine tool plans. at this point, knife storage capacity, a heavier tool can, and often additional tr

52、ansport unit to complete the knife between the spindle and cutting tool transport. daidao the knife from the atc, the election knives, automatic loading and unloading machine tool and tool exchange institutions (manipulator), composed of four parts, used widely. tool automatic tool change the manipu

53、lator system, the whole process more complicated atc. we must first used in the processing of all installed in the standard tool on the knife handle in the machine outside the pre-size, according to a certain way add to the knife. atc, selected first in the knife knife, and then from atc, from the k

54、nife from the knife or spindle, exchange, the new knife into the spindle, the old knife back into the knife.   atc, as the former two knives to accommodate a limited number can not be too many, can not meet the needs of complex parts machining, cnc machine tool automatic tool change daidao the

55、use of the automatic tool change devices. the knife has more capacity, both installed in the spindle box side or above. as for the automatic tool change daidao device cnc machine tool spindle box only a spindle, spindle components to high stiffness to meet the machining requirements. the number of e

56、stablishments in larger knife, which can meet the more complex parts of the machining processes, significantly improving productivity. daidao system for the automatic tool change applied to drilling centres and cnc machining centers. the comparison drawn daidao automatic tool change system is the mo

57、st promising. 3.plc control of the knife random mode of election3. 1common methods of automatic election knifeautomatic control of the knife cnc refers to the system after the implementation of user instructions on the knife library automation process, including the process to find knives and automa

58、tic tool change (63,71. cnc machining center device (cnc) directive issued by the election knife , a knife, the tool required to take the knife position, said the election automatic knife. automatically elected knife there are two ways: random sequence election knives and knife election method.3.1.1

59、 order election knifetool selection order is the process tool according to the sequence of the insert knife, the use of knives in order to take place, used knives back at the original knife, can also order add block, a knife. in this way, no need tool identification devices, and drive control is a relatively simple, reliable and can be used directly from the points of the knife machinery to achieve. but the knives in each of the tool in different processes can not be reused, if the tool is installed in accordance with