产品包装设计作业指导书要点

1、在日落和日出之间，我们用自己制造的可以随意接通的灯来照明.这些灯有着忽 隐忽现的亮 度和快速投下的阴影，无法与日光相比，它们太弱，太静止.but when i do not think of these lights that we make ourselves as an attempt to eliminate darkness, when i think of them as night-time lights, as accentuated night, as intimate 川uminatedclearings that we carve out of the darkness,

2、then they can become beautiful, then they can have a magic all their own.但是，当我没有把我们自己制造的这些灯看作一种消除黑 暗的尝试，当我把它们作为夜间照明，作为被强调的夜晚，作为照亮我们雕刻黑暗的空 地的朋友，它们就变得美丽，它们就拥 有完全作为它们自身的魔力.which lights do we want to switch on between sunset and sunrise?日落和日出之间，哪些灯是我们想 要点亮的？ what do we want to 川uminate in our buildings,

3、 cities, and landscapes在我 们的房子，城市和景观中，我们想要照亮什么？ how and for how long?如何（照亮？（照 多久？ 510 市场 marketing 11 财务accountant 12 研发 r&dinitiatedbydatedepartmentverified bydatedepartmentdateapproveddepartmentby修改履历revision history版本修改描述rev.description of changes修改人edited/updated by日期date1 .目的purpose为了规范公司产品包装作业

4、的运作，保证产品能满足客人的要求，保护产品在运输中不受破坏特制定本规范。in order to specify the operation of packing of product, ensure product can satisfy the requirements of customer, and protect the product from damage, we make this specification.2 .范围scope本规范适用于本公司出厂的全部产品。applicable to all products manufactured by our company3 .定义

5、definition无 none4 .职责responsibility4.1 工程部负责定义产品包装方式及进行包装验证；engineering department is responsible for design and verification of packing of product.4.2 生产部负责按包装要求，进行备货，包装等作业；production department is responsible for the preparation, packing and other operations according to the packing specification.

6、4.3 质量部负责包装检验；quality department is responsible for packing inspection;5 .程序procedures5.1 产品包装设计原则principles of p roduct packing design5.1.1 满足客户要求 meeting requirements of customter所有包装设计，特别是每箱的装箱数量，必须满足客户要求，在没有征得客户同意下，不可私自作有关改动。如发现客户要求 有较大问题时可同客户交流后由客户定夺。all packaging design, in particular the quan

7、tity of cases per carton , must meet customer requirements . without the consent of the customer , packing method cannot be changed. if there is a big problem in requirements of customers, communicate with customers , and decide by custome rs.5.1.2 低成本原则 low cost principles包装设计时要做到成本最低，效果最好。when des

8、igning the packing, use the lowest cost, and achieve the best results.5.1.3 安全原则 safety principles设计包装时必须充分考虑包装材料对所包装产品的安全性影响，不致因正常的运输、振动、承载等外界作用致使包装失败。例 如对于光洁度要求较高产品的表面要用保护膜加以保护，如玻璃表面、透明塑料表面、易刮花的五金表面，如产品之间摩擦碰 撞会导致产品损坏的需要隔离包装，如产品易碎需要有隔离层等。when designing the packaging , the packaging material s impac

9、t on the safety of packaging products must be considered, avoid packing damage because of normal transport, vibration, bearing and other external effects. for example,the producthave high surface requirements must use protective film, such as surface of glass, surface of transparent plastic, an surf

10、ace of the metal that easy to be scratch ed. if the friction between product s will lead the product damage, products need isolate d packing . if product is fragile, a isolation layer is n ecessary .5.1.4 体积最小原则 smallest principle为了节省运输成本，保证产品易便携、易搬运，故在进行包装设计时须从包装方法上考虑，尽量使包装体积最小。in order to save the

11、 transportation cost, ensure theproduct is easy to carry, the packaging design should beconsidered from the packaging method, as far as possible to minimize the size of the packaging.5.1.5 易装易取原贝u easy dismantling principle包装设计时要考虑作业者在装箱和拆箱时便捷、流畅，不要因设计缺陷而致使作业者很难操作。packaging design should consider co

12、nvenience and fluencyof boxing and unboxing, dont due to the designdefects , cause the operator is difficult to operate.5.1.6 重量、数量适中原则weight and quantity moderate principle一般每箱产品的总重量应在 20kg以下以搬运工可搬运为原则。装箱数量按客人要求执行，若客人没有要求则每箱所装产品的 数量一般为打数或其倍数 如6、12、24、48等，也可以是10的倍数，如10、20、50等，以方便计算。generally, the to

13、tal weight of each case should be below 20kg according to the principle that porter can carry . packing quantity should meet the requirements of the customer , if the customer is not required , quantity of products in each box is generally onedozen or its multiple, for example 6, 12, 24, 48, also ca

14、n be multiples of 10, such as 10, 20, 50, to facilitate the calculation.5.1.7 重心最低原则lowest center of gravity principle在进行包装设计时，要使整箱的重心最低，以增加稳定性。in the packaging design, make the fcl lowest center of gravity, in order to increase the stability .5.1.8 包装箱外形设计合理reasonable packaging box design为保证结构刚性包装箱

15、长、宽之比建议不大于2.5: 1,高、宽之比不大于 2: 1并不小于0.15 : 1。in order to ensure the rigid structure of packaging box, length and width ratio is not more than 2.5:1, high and wide ratio is not more than 2:1 and not less than 0.15:1.5.2 产品包装方式 product packing method根据产品包装要求及产品的特点，选择合适的包装方式；according to the requirements

16、 of product packaging and the characteristics of the product, select a appropriate packaging method;5.2.1 木箱包装 packed in wooden cases一般情况下，当所包装的产品很重（本身很重或数量很多导致很重），工人无法或不宜徒手搬运时可采用木箱包装。木箱通常 情况下采用胶合板或熏蒸原木制作。generally, when the product is very heavy （itself is very heavy or quantity is large, workers c

17、an not or should not be able to use manual handling, wooden packing can be used. wooden boxes are usually made of plywood or log fumigation.5.2.2 纸箱包装 packed in paper cases当可采用纸箱包装时，优先选择纸箱包装。纸箱包装又可分为以下几种方式when the carton packaging can be used, the priority choice is carton packaging. carton packagin

18、g can be divided into the following several waysa.纸箱包装： 将产品直接放入纸箱内。carton packaging: put products directly into the cartonb.纸箱+内盒包装：将产品放入内盒内然后再放入纸箱内。carton + inner box packing: put the product into the inner box and then put it in the box. c.纸箱 + 型纸包装：斗寻产直直接放入纸箱并根据需要在相应位置放入成型纸板，固定产品在纸箱内的位置。carton +

19、molding board packaging:put the products directly into the carton and according to the requirements to put the molding board in the appropriate position, fix the location of the products in the box.不论采用哪种包装方式必须对产品做好防潮处理，一般情况下可用pe膜/pe袋、珍珠棉、气泡袋等材料对产品的外围进行包装保护。对于含电子元件的产品为了使包装内空气干燥可使用硅胶等吸湿干燥。no matter w

20、hich kind of packing, treatment for moisturing must be good, in general, use pe film /pe bag, pearl cotton, bubble bags and other materials for the protection of the product s outer packaging. for the product containing electroniccomponents, in order to make the packaging air dry, use silica gel and

21、 others to absorb moisture and dry.6.3 标签要求 labeling requirements标签设计一般要根据客户的要求来确定，可直接印在箱体侧面四面或打印出来贴在箱体侧面四面。标签设计主要考虑以下几方面的内容：订单号码、产品型号 、装箱数量、整箱净重、整箱毛重、外箱尺寸、产品产地、防潮防水易碎防倒置标志等。label design in general is determined according to customer s requirementsinted beectly on the side of thebox or printed out a

22、nd put on the side of the box. box label design mainly consider the following several aspects of content: purchase order number, product type, packing number, fcl net, fcl gross weight, carton size, product origin, waterproof , moisture proof ,fragile and anti inversion indicated.5.4 产品包装设计 product

23、packaging design5.4.1 木箱包装wooden box packing木箱一般采用胶合板或熏蒸原木为材料制作木箱的总高度不操过1.1米木箱至少其中一个方向的尺寸长或宽不能超过1.1米.wooden box is generally used plywood or fumigation wood, the total height of the box is not more than 1.1 meters, atleast in one direction or width can not be more than 1.1 meters.5.4.2 纸箱包装paper cas

24、e packing根据产品的包装要求选择合适的纸板及纸箱。当选择纸箱的规格时，要充分考虑到所包装产品的实际情况，合适的装箱方 式，尽量选择合适的箱规，避免产品装箱后纸箱过与空或太小，从而影响纸箱的总体承重强度。according to the requirements of the product packaging , choose the appropriate carton. when choosing carton specifications, it is necessary to give full consideration to the actual situation of

25、the packaging products, the suitable packing method, try to choose suitable box, avoid packing empty or too small, thus affect overall bearing strength of the carton.5.4.3 包装方案验证 package verification不管采用哪一种方式的包装，产品的包装方案一定要通过事先验证。通过实际或相似产品的摆放，从而确定相关包材的具体规 格。必要时，还需要制作样箱来进一步验证。采用木箱包装时，一般要做震动测试，采用纸箱包装时，

26、一般要做跌落测试，跌落测 试标准如下：no matter choose which kind of packaging method, the packaging method of the product must be verified prior.through put the actual or similar product, choose the specific specifications of the package. if necessary, make samplecases to further verify. when using wooden boxes, need

27、 to do vibration test, when using carton packaging, need to dodrop test, drop test standards are as follows:国明：料混力* 啊果r315.4.4产品包装方案制定product packaging solutions根据实际验证的结果，编制正确的产品包装规范，且对产品不同的包装方式必须有一一对应的包装方案。该包装方案里需明 确说明产品的包装方法，必要时，需要配置相应的图档辅助说明。包装方案里需有明确的包材清单表，主要包含包材规格、 数量、材料等。according to the results of the actual verification, prepare the correct product packaging specifications, and different packaging methods of product must have a corresponding packaging plan. the packing plan needs to be clearly stated in the product packaging method, when necessary, it is necessary to config