蓄电池规格及技术参数.doc

GFM系列阀控密封铅酸蓄电池应用范围1：电信、移动、联通、铁道、船舶、等各种通信、信号系统备用电源。The standby power in all kinds of telecommunication signal system , such as: Telecom, Mobile, Unicom, railway and ship, etc. 2：电力系统、核电站备用电源、太阳能、风能发电储能。The standby power in electric power system and nuclear power station; photo voltaic system.3：UPS、应急照明等备用电源。 UPS，Emergency lighting 规格型号及尺寸类型额定电压规格（C10）外形尺寸(mm)长宽槽高(总高)重量(kg)备注GFM2V200Ah101184348(365)16GFM2V300 Ah132184348(365)21GFM2V400 Ah163184348(365)26GFM2V500 Ah194184348(365)31GFM2V600 Ah225184348(365)37GFM2V800 Ah303184348(365)50GFM2V1000 Ah373184348(365)61GFM2V1200 Ah464180363(381)78GFM2V1600 Ah403354355(378)116GFM2V2000 Ah492352355(378)135GFM2V3000 Ah712352355(382)200产品特点 Products characteristics1、 极板：极板采用矩形大网格分块结构、专有的四碱式硫酸铅形成技术和专有合金材料制作，提高了电池体积比能量和重量比能量。Plate: We adopt some specific technology in casting plates such as rectangle gridding structure, sulphuric lead forming and alloy material producing, which enhances the volume ratio energy and weight ratio energy.2、 正板栅使用低锑银合金，克服了铅钙合金正板栅的无锑效应和抗蠕变性差的缺点，无论浮充使用还是循环使用，都有很长的使用寿命，不同地区供电条件的差别将不会对蓄电池性能造成影响。Low Sb-Ag alloy is used in spines casting, which overcomes the defects of no-Sb effect and bad anti-squirm performance, thus, the battery has long life no matter in floating charge use or in cycle charge use and will not effect by the difference of electric supply of different districts.3、 隔板：采用吸收式超细玻璃纤维隔板，其内阻低，高倍率放电性能好。Separator: The absorbed super fine fiber glass is used. The inner resistant is low and the discharge performance at high rate is good.4、 活性物质：正、负极铅膏中加入特殊添加剂，通过合理分配有机和无 机添加剂比例，减少电池在电化学反应过程中的有机物分解，改变活性物质微观结构，活性物质利用率高、充电接受能力强。Active material: Special additive is added into the lead cream of positive and negative plates and the decompounding of organic material of batteries in electrochemistry reaction is reduced through reasonable distributing the ratio of organic and inorganic additive, which change the micro-structure of active material, thus, the usage rate of active material is high and the charge acceptance is good.5、 高纯度电解液：采用高纯度电解液和特殊添加剂，提高了活性物质利用率，降低了电池的自放电。High purity electrolyte: Due to the addition of high purity electrolyte and special additive, the usage rate of active material enhances and the self-discharge rate reduces.6、 特殊的极柱密封结构：采用特有的组合迷宫极柱密封结构（专利技术）及焊接工艺，确保密封安全可靠。Special post sealing structure: The special combined labyrinth post sealing structure and welding technics are used to ensure the sealing safe and reliable.7、 安全阀结构：阀体采用阻燃ABS材料，阀芯为柱状结构，双过滤酸雾滤片，具有准确控制开、闭阀压力、阻燃、过滤酸雾功能。Safety valve: The body of valve is fire retardant ABS material; the core of valve is post structure and the acid filter is double, so the valve has the function of controlling the pressure of opening and closing valve correctly, fire retardant and acid filtrating.8、 极群包片结构：采用U型双层纵向包膜方式和紧装配技术，有效的防止了极板应力对隔膜弹性的影响，隔膜附着性好，吸酸均匀，极板无污染。Combined plates structure: The technics of U-type double layers vertical packing and tight equipping are used to prevent the effect to separator stretch by plates stress. The attachment and absorbability of separator is good. The plate will not cause pollution.9、 极柱：采用大直径铜芯，极柱与汇流排连体压铸，载流面积大，内阻小。Post: The core with large diameter is used and cast the post with the connector tightly as a unit. The surface of passing current is large and the inner resistant is low.10、 短路保护：正、负极板增加有塑料护套，有效防止电池正、负极短路和电池卧放时的极板弯曲变形。Short circuit protection: The plastic cover is added to positive and negative plates to prevent the battery from short circuit and the distortion of plates when the battery is lied down.11、 电池壳体：由阻燃、超强ABS材料制成，采用专利热封技术，具有造型美观、结构牢固、密封可靠等特点。Container: Making of fire retardant ABS material and sealed with patent heat sealing technics, the container is beautiful, hard and safe.12、 高温固化工艺，提高了正极板栅的使用寿命。Solidification with high temperature extends the life of spines.13、 惰性气体保护焊接，专用胶二次密封，确保电池无泄漏。The inert gases is used when welding and special glue is used in second sealing, which can prevent the battery from leaking.14、 单体结构系列化：GFM系列电池为独特设计的单体结构，最 大单体容量达3000Ah，用户有更大的选择余地。Single cell with various series: GFM series battery is designed in specific single cell structure. The largest capacity is 3000Ah. Users can select in a wide range. 15、 系统结构：GFM型阀控密封铅酸蓄电池既可采用柜、架安装，也可地面排放，单体间预留了散热空间，能够有效防止电池热失控。System structure: GFM VRLA battery can be installed in cabinets, on racks or just on floor. There is space left between batteries for heat dispelling, which can prevent the battery from heat out of control efficiently.主要技术指标Main technical index1 设计寿命 Design life:浮充寿命 6年 （25正常使用充足电的条件下）Floating life: 6 years (at normal usage and full charged, 25)深循环寿命 1200次 (25放电深度80%，且及时补充足电条件下)Deep cycle life: 1200 times (80% deep discharge and charge fully in time, 25)2 充电接受能力Charge acceptance:电池100%深度放电后，以2.35V/单体恒压限流0.15C10(A)充电10h，充得电量在放出电量的98%以上After discharge at 100% depth, charge for 10 hours at constant voltage of 2.35V/cell and limited current of 0.15C10(A), then, the power charged is more than 98% of power discharged.4 密封反应效率 99% Sealing reaction efficiency 99%5 容量保存率 静置90天后剩余容量90%Capacity remain The capacity will remain more than 90% after storage for 90 days.6 额定容量Rated capacity10h率容量 0.1C10A放电至终压1.80V/单体 C10Capacity at 10h: Discharge at 0.1C10A until the terminal voltage is 1.80V/cell C103h率容量 0.25C10A放电至终压1.80V/单体 0.75 C10Capacity at 3h: Discharge at 0.25C10A until the terminal voltage is 1.80V/cell 0.75C101h率容量 0.55C10A放电至终压1.75V/单体 0.55 C10Capacity at 1h: Discharge at 0.55C10A until the terminal voltage is 1.75V/cell 0.55C107 容量恢复性能（短接性能）Capacity recovery (short circuit)以0.1C10A放电至0V，短接24h，以2.35V/单体恒压限流0.15C10(A)充电10h，再以2.25V/单体恒压限流0.1C10(A)充电24h，检测C10容量，连续5次，其剩余容量不小于初始容量的90%。Discharge at 0.1C10A until the voltage is 0V, then have the battery been short circuit for 24 hours. Charge for 10 hours at constant voltage of 2.35V/cell and limited current of 0.15C10(A), then Charge for 24 hours at constant voltage of 2.25V/cell and limited current of 0.1C10(A). Test the capacity of C10. After 5 times of such process, the remaining capacity will not less than 90% of the initial capacity.该产品符合信息产业部YD/T799-2002标准及日本JISC8704-2：1999标准和IEC60896-2，2000标准。The product can meet the requirement of YD/T799-2002 standard of Chinese Information Industry Department, Japanese JISC8704-2：1999 standard IEC60896-2，2000standard. 主要生产、检测、理化、环保设备:Main equipments for producing, testing, physical and chemical processing and environment protecting铸板机:美国WIRTZ公司生产,为目前世界最先进的工业电池铸板设备。Casting machine: The casting machine is imported from American WIRTZ company and is the most advanced equipment in battery producing in the world.和膏机:美国WIRTZ公司生产,“牛头”牌,其附带的风冷、水冷系统及为保证一年四季铅膏各参数一致性的湿度探测仪为国内首次使用。Mixer: The oxmaster mixer is produced by American WIRTZ. The wind cooling and water cooling system and the humidity prober which can keep the parameter of the lead paste in the whole year consistent are first used in our country.涂板机:美国MAC公司生产,为最新型工业型板栅涂板机,满足大容量极板的涂板需要。Pasting machine: The utmost new machine is produced by American MAC and can meet the requirement of pasting large capacity and long plates.蓄电池组装生产线:德国HADI公司生产,包括分片、刷耳、包片、组装、焊接、热封、自动打码、端子氩弧焊、极柱封胶全过程。Combination line: This equipment is produced by German HADI and includes the following procedures: plate disparting, lug grinding, plates packing, combining, welding, heat sealing, automatic code striking, terminal argon arc welding and post sealing.化成设备:实行计算机管理,由计算机控制化成制式、监控化成过程、记录化成数据、分析化成结果,保证了电池的化成质量,提高了电池的一致性。Formation equipment: The computers are used to manage the formation, for example: use the computer to determine the formation system, monitor the procedure, record the rata and analyse the result, which guarantee the quality of formation and enhance the consistence of batteries.环保设备:包括铅烟净化系统、湿式除尘系统、酸雾处理系统及包括二级净化设备和四级净化池的含铅、酸废水处理系统。Environment protection equipment: It consists smoke removing system, moisture dust removing system, acid smoke rem