冶金小词汇.docx

3.4.14剔除辊道3.4.14 Rejecting roller table功能：升降辊道位于检查链中间，负责将剔除后的废品输送至废品收集槽。(还可将50x50以下规格编组预定尺角钢输送至收集槽吊出线外矫直精整。)Function: Lifting table is in the middle of the checking chain, which is responsible to move the removed waste to the waste collection tank. (And it can also transport the grouped and pre-sized angle steel, with the specification below 50x50, to the hanging out line of the collecting slot for straightening and refining.)设备组成：辊子装配、底座、辊道盖板、固定挡板、升降辊道等。Equipment composition: Roller assembly, the base, the roller cover, fixed dam, lifting roller table and so on.结构特点：齿轮减速电机单独传动。辊子采用钢管（35#）焊接而成，采用YPG辊道专用电机驱动。为防止辊道反转轧件冲出辊道端部，首末端设置固定挡板。Structural features: the gear reduction motor drives singly. Using steel pipes (35#) to weld the roller, this is driven by the dedicated motor of the YPG roller table. The head side and the end side set the fixed dam in order to avoiding the rolled pieces rush out the two ends of the roller table when it reverses.主要参数：Main parameters:辊子规格：265800 mmRoller specification: 265800 mm辊子间距：2000 mmRoller space: 2000mm辊子速度： 0.252.5 m/sRoller speed: 0.252.5 m/s减速电机：2.2kW（17个）Speed reducing motor: 2.2KW (17 pieces)升降辊道油缸：C25WE125/90，数量：1只Lifting roller table oil tank: C25WE125/90, quantity: 1 piece3.4.15废料收集槽（含拨料机构）3.4.15 Garbage collecting slot (with ejecting device)废料收集框位于剔除辊道末端，当废料和小规格角钢输送至收集槽之前，气动拨料人工配合，将废料和小规格角钢拨进固定收集槽中。The garbage collecting frame locates in the end side of the rejecting roller table. Before the garbage and the standard angle steel are transported to the collecting slot, tapping the garbage and the standard angle steel in the fixed collecting slot by the combination of the pneumatic ejecting device and manual work. 技术参数：Technological parameters:气缸QGB200，数量：2只Cylinder QGB 200, quantity: 2 pieces 工作压力：0.4-0.6MPAWorking pressure: 0.4-0.6MPA3.4.16 自动码垛系统3.4.16 Automatical palletizing system自动码垛系统由翻料装置、升降码垛装置、升降接料装置和码垛输出辊道等组成。用于将不同规格型钢码成垛，以便于打捆。Automatic palletizing system is composed by the material turning over device, the lifting palletizing device, lifting splicer and palletizing output roller table etc. It is used to palletize the different specification steel into target in order to bundling.3.4.16.1码垛翻坯装置3.4.16.1 Palletizing ballet turning over device用途: 位于码垛台架尾端，用于将分组成排的型钢翻转180后平稳移送到码垛升降接料装置上。该电磁码垛翻坯装置主要由电磁铁、翻转装置、驱动装置等组成。Usage: Located in the end of the palletizing rack, which is used to transfer the grouped turned 180 beam steel to the lifting and splicer devices of the palletizing stably. The electromagnetic palletizing billet turned device is composed mainly by the electromagnet iron, the turning devices, and the driving device etc.技术参数：Technological parameters:电磁翻转机构翻转角度：180；The turning degree of the electromagnet turning organization: 180电磁翻转机构翻转速度：4s；The turning speed of the electromagnet turning organization: 4s电磁吸附力：4t；The electromagnet adsorptive power: 4t3.4.16.2升降码垛装置 3.4.16.2 Lifting palletizing device位于码垛台架尾端的上部，用于将分组成排的钢材平稳移送到码垛升降接料装置上。该电磁码垛移送装置主要由电磁铁、升降装置、横移装置等组成。Usage: Located in the upper side of the palletizing rack, which is used to transfer the grouped steel to the lifting and splicer devices of the palletizing stably. The electromagnetic palletizing billet turned device is composed mainly by the electromagnet iron, the lifting devices, and the traversing device etc.技术参