[合同协议]补偿贸易合同.doc

合同编号：_补偿贸易合同甲方：_乙方：_签订日期：_年_月_日第 1 页 共 14 页补偿贸易合同中文文本本合同于年 月 日中国市签订。甲方：中国公司法定地址：电话：电传：乙方：国公司法定地址：电话：电传：双方在平等互利基础上，通过友好协商，特订立本合同。第一条 贸易内容（一） 乙方向甲方提供用于生产的型机械一各种其他辅助机械设备，并同事提供各类机械设备所必须的附配件及备用件，以及在生产过程中各种必须的测试一起。具体的各类机械设备、测试仪器、附配件、备用件之型号、名称、规格、数量、价格、包装要求、交货期限等，由双方另行签订设备进口公司，作为本合同不可分割的一部分。（二） 甲方用乙方提供的机械设备所生产的部分产品以及其他商品，经双方协商后，也可用工厂生产的 来偿付全部机械设备的价款。具体的偿付商品之名称、数量、价格、交货期限等，由双方领行签订补偿商品供货合同，作为本合同不可分割的一部分，设备进口合同与补偿商品供货合同可合并为补偿贸易购销合同，见附件。第二条 支付条件由甲乙双方对开信用证，即由甲方分期开出以乙方为受益人的远期信用证，分期、分批支付全部机构设备的价款；乙方开出以甲方为受益人的即期信用证，支付补偿商品的货款。甲方用乙方支付补偿商品的货款，来支付全部机械设备的价款。当乙方支付的货款不能相抵甲方所开的远期信用证之金额时，其差额部分由乙方用预付货款方式，在甲方所开的远期信用证到期前汇付甲方，以使甲方能按时议付行所开的远期信用证。甲方所开的远期信用证的按期付款，是基于乙方按规定开出即期信用证几按规定预付货款。乙方保证按规定开出信用证及预付。第三条 付款期限甲方用 年零个月，分月用商品偿付全部机械设备的价款。偿还日期自第一批机械设备到货后约个月后开始，原则上每月偿还日期自第一批机械设备到货后约个月后开始，原则上每月偿还的金额是全部机械设备价款的分之。甲方可以提前偿还，但需在个月前通知乙方。在甲方用补偿商品偿还机械设备借款期间，乙方应按本协议项下的有关补偿商品合同的规定，开出以甲方为受益人的足额、即期、不可撤消，可分割、可转让的信用证。第四条 货币双方商品觉用币计价。乙方提供的全部机械设备及所有仪器、附配件用币作价，甲方提供的补偿商品则按签订合同时甲方出口货物的人民币作价，以当时的人民币对币的汇率折算为币。第五条 利息计算甲方所开的远期信用证及乙方所预付货款的利息应由甲方负担。双方议定年利息率为百分之。第六条 技术服务货物到达甲方口岸后，由甲方自行安装。但在主要设备安装过程中，甲方认为需要时，乙方必须派出技术人员进行现场知道，提供必要的技术服务，在此过程中由于技术上的问题，所造成的损失由乙方负责。经双方协商，为完成此项工作，由乙方派出数量的技术人员。在中国的一切费用均由乙方承担。第七条 附加设备在执行本协议过程中，如发现本合同项下的机械设备在配套生产时需要继续增添新的机械设备或测试仪器时，可由双方另行协商，予以增订。增订的项目仍应列入本合同范围之内。第八条 保险设备进口后由乙方投保。设备所有权在付清货款发生转移后，如发生意外损失先由保险公司向投保人赔付，再按比例退回甲方已支付的设备货款。第九条 违约责任乙方不按合同规定购买补偿商品或甲方不按合同规定提供商品时，均应按合同条款承担违约责任，赔偿由此造成的经济损失，并向对方支付该项总值的%的罚款。第十条 履约保证为保证合同条款的有效履行，双方分别想对方提供由各自一房银行出具的保函，予以担保。甲方的担保银行为中国银行分行，乙方的担保银行业国银行。第十一条 合同条款的变更本合同内容如遇特殊情况需要变更，须经双方协商一致。第十二条 不可抗力合同一方对由下列原因而导致不能或暂时不能履行全部或部分合同义务的，不承担责任：水灾、火灾、地震、干旱、战争或其他任何在签约时双方不能预料、无法控制且不能避免和克服的时间。但该放应尽快地将所发生的时间通知对方，并应在时间发生天内将有关机构出具的不可抗力时间的证明寄交对方。如果不可抗力时间之影响超过0天，双方应协商 合同继续履行或终止履行的事宜。第十三条 仲裁因履行本合同所发生的一切争议，双方应友好协商解决，如协商仍不能解决争议，则应将争议提交中国国际经济贸易仲裁委员会（北京），依据其仲裁规则仲裁，仲裁裁决是终局的，对双方都有约束力。仲裁费应由败诉一放承担，但仲裁委员会另有裁定的除外。在仲裁期间，除仲裁部分之外的其他合同条款应继续执行。第十四条 文字、生效本合同用中文和英文写成，两种文字具有同等效力。上述两种文字如有不符，以中文为准。本合同自签字之日起生效，有效期为年。期满后，双方如愿意继续合作，经向中国政府有关部门申请，获得批准后，可延期年或重新签订合同。甲方：中国公司代表（签字）乙方：国公司代表（签字）见证人：中国律师事务所律师（签字）英文文本pensation trade contractthis contract is hereby made and entered into between co.(hereinafter referred to as patty a)andco.(hereinafter referred to as praty b)thisday of,in,china, adhering on the principle of equality and mutual benefit and through amicable consultation.party a: pany, china.address: tel: telex: party b: pany, address: tel: telex: article 1 introductiona) party b shall provide party a with machines of model to be used in production.along with them shall also be provided various kinds of supporting machinery,accessories and spare parts it needs,and the various kinds of measuring and testing instruments required in the course of production,the specific models, names,specifications, quantity,unit prices,packing requirements and the deadline for delivery shall be specified in an additional contract to be made between the both parties,which will serve as a integral part of the contract.b) the total cost of the entire machinery and its supporting equipment shall be paid to party b of the part of the products and/or other modities produced by party a with the machinery supplied by party b.it may also be paid to party b of (a certain product)turned ort by .(this practice is hereinafter referred to as a makeup payment).the specific names,quantity and unit price of the products to be delivered as makeup payment,and the deadline for delinery,are to be specified in an additional contract between the two parties on productssupplying as make up payment,which shall be the integral part of the contract.the two additional contracts mentioned above may be merged as one called buy and sell contract on pensation trade.article 2 terma of paymentthe two parties shall open a l/c in favour of each other.i.e.party a shall open,at regular intervals,longterm l/c in favour of party b to pay in install ments the entire cost of the machinery and its support sight l/c in favour of arty a as a payment for the cost of the products to be delivered by party a.party a shall pay for the total cost of the machinery and its supporting equipment with the sum of money which party b shall pay the products to be delivered by party a as a make up payment.in case the money to be paid by pairy b is not enough to cover the value of the long term l/c is determined by the at siggt l/c opened by party b and its down payment as stipulated in the contract .party b grarantees to fulfil what is required of it to do as mentioned herein.article 3deadline for paymentparty a shall pay the total cost of the machinery and its supporting equipment supplied by party b by delivering the products it produces to party b as a make rp payment on a month to month basis , and pay is off within a preriod of years and months.the payment shall start approximately months after the first delivery of the machinery is made .in principle,the sum to be paid per month shall be percent of the total amount due to be paid for the machinery party a can make its payment ahead of schle with a notice given to party b months in advance.during the pensation period ,party b shall open a l/c in favour of party b,covering the total amount , at sight , irrevocable , divisible and assignable ,in accordance with the relevant provisions in the buy and sell contract on pensation trade.article 4 currency for pricingproducts provided by either party shall be priced in terms of.all the items supplied by party b,including machinery ,the required apparatus,accessories and spare parts shall be priced directly in terms of above mentioned ;while the products provided by party a as a make up payment for the machinery supplied by party b shall be first priced in terms of rmb as orher similar exports at the time the contract is made and then the prices in rmb shall be turned into those in above mentioned according to the current exchange rate at the time.article 5 interest rateparty a shall pay the interest on its long term l/c and the down payment of party b.the annual interest rate is agreed upon at %.article 6 technical serviceafter arrival at the destination port,the machinery shall be assembled by party a.when party a believes it is necessary ,party b shall send its technicians to provide onthespot instructions and other required technical assistance during the course of assembling. party b shall be liable for the losses incurred in the coures fo assembling as a result of technical default of its prat.after approval by both parties, party b shall send a group of technicians to china to faciliate the pletion of the project. the cost incurred in china shall be borne by party b.article 7 additional equipmentin the course of implementing the contract if it is foun necessary that ,in addition to the machinery and accessories already listed in the provisions, some additional items of the equipment and measuring and testing apparatus are needed, an additional order shall be agreed upon through negotiation .the items thus added shall be incorporated in the contract.article 8 insuranceafter being delivered in china, the machinery and its supporting equipment shall be insured by party b. the unforeseen losses in connection with the equipment shall be indemnified for by the insurance pany first to the insurer (party b) in case the equepment has already been paid off for and thus transferred into party as possession.then a proportional part of the sum paid by the insurance pany shall be allotted to party a to cover the payment party a has already made for the items of equipment involved the losses.article 9 liability for breacheither party shall be liable for a breach of contract in accordance with the provisions in the contract and shall indemnify for all the losses thus if party b should fail to make purchase of the products to be delivered by party a as make up payment , or party a should fail to deliver the products for pensation . in such case, the breaching party shall pay to the other a sum as a fine , which shall account for % of the total cost the products in question.article performance guaranteeto guarantee the implementation of the contract, each party shall submit to the other a performance guarantee issued by a bank agreed by both parties. the guarantee bank of party a is bank of china, while that of party b is bank.article amendment of the contractwhen the contract needs to be amended in certain particular cases, the amendment can be effected only after it is agreed upon by both parties through consultation.article force majeureeither party shall not be held resposible for failure or delay to perform all or any part of the contract due to flood, fire earthquake , drought , war or any other events which coule not be predicted at the time of the conclusion of the contract, and could not be controlled, avoided or overe by the parties. however,the party effected by the event of force majeure shall inform the other party of its occurrence in written as soon as possible and thereafter send a certificate of the event issued by the relevant authority to the other party but no later than days after its occurrence.in the event of force majeure last over 0 days, both parties shall negotiate the performance or the termination of the contract.article arbitrationall disputes arising from the performance of this contract should be settled through friendly negotiations. should no settlement be reached through engotiation, the case shall then be submitted for arbitration to the china international economic and trade arbitration mission(beijing) and the rules of this mission shall be applied. the arbitration fee shall be borne by the losing party unless otherwise awarded by the arbitration organization.in the event of force majeure last over 0 days, both parties shall negotiate the performance or the termination of the contract.article arbitrationall disputes arising from the performance of this contract should be settled through friendly negotiations. should no settlement be reached throuhg engotiation, the case shall then be submitted