单机配置方案Solaris8安装过程

1、#单机配置方案Solaris8安装过程#本安装是针对T1125的安装过程，没有控制台，通过TC登录安装#安装过程中注意语言的选择，在用引导盘安装时选择语言为English，不然显示的是乱码，但在安装语言环境时一定要注意选择上中文，不然在安装完后会出现不能正确设置中文字体环境的现象，经过重新安装语言环境也不能解决这个问题，切记在安装时注意。Boot device: disk:a File and args: The file just loaded does not appear to be executable.0 ok boot cdromBoot device: /pci1f,4000/s

2、csi3/disk6,0:f File and args: SunOS Release 5.8 Version Generic_108528-07 64-bitCopyright 1983-2001 Sun Microsystems, Inc. All rights reserved.Configuring /dev and /devices Using RPC Bootparams for network configuration information.Skipping interface hme0Solaris Web Start 3.0 installerThe Solaris In

3、staller can be run in English, or any of the following languages: 0) English 4) Japanese 1)French 2) German 5) Korean 7) Spanish 8) Swedish 6) Simplified_Chinese 3) Italian 9) Traditional_ChineseSelect the language you want to use to run the installer: 0Select a locale :0 (English (C-7-bit ASCII)Eng

4、lish has been selected as the language in which to perform the install.Starting the Web Start 3.0 Solaris installer|Solaris installer is searching the systems hard disks for a location to place the Solaris installer software.The default root disk is /dev/dsk/c0t0d0.The Solaris installer needs to for

5、mat /dev/dsk/c0t0d0 to install Solaris.WARNING: ALL INFORMATION ON THE DISK WILL BE ERASED!Do you want to format /dev/dsk/c0t0d0? y,n,?,q yNOTE: The swap size cannot be changed during filesystem layout.Enter a swap slice size between 382MB and 17268MB, default = 512MB ? 1024The Installer prefers tha

6、t the swap slice is at the beginning of thedisk. This will allow the most flexible filesystem partitioning later in the installation.Can the swap slice start at the beginning of the disk y,n,?,q yYou have selected the following to be used by the Solaris installer: Disk Slice : /dev/dsk/c0t0d0 Size :

7、 1024 MB Start Cyl. : 0WARNING: ALL INFORMATION ON THE DISK WILL BE ERASED!Is this OK y,n,?,q yThe Solaris installer will use disk slice, /dev/dsk/c0t0d0s1.After files are copied, the system will automatically reboot, andinstallation will continue.Please Wait.Copying mini-root to local disk.done.Cop

8、ying platform specific files.done.Preparing to reboot and continue installation.Rebooting to continue the installation.syncing file systems. donerebooting.Resetting . screen not found.Cant open input device.Keyboard not present. Using ttya for input and output.Netra t 1120/1125 (2 X UltraSPARC-II 44

9、0MHz), No KeyboardOpenBoot 3.23, 1024 MB memory installed, Serial #13560966.Ethernet address 8:0:20:ce:ec:86, Host ID: 80ceec86.Rebooting with command: boot /pci1f,4000/scsi3/disk0,0:b Boot device: /pci1f,4000/scsi3/disk0,0:b File and args: SunOS Release 5.8 Version Generic_108528-09 64-bitCopyright

10、 1983-2001 Sun Microsystems, Inc. All rights reserved.Configuring devices.Configuring /dev and /devicesUsing RPC Bootparams for network configuration information.syslog service starting.Running in command line modeWelcome to the Web Start Solaris Command Line installation!The following questions wil

11、l gather information about this system.This information will be used to configure: Network Name Service Date and Time Root Password Power Management Please wait while the system information is loaded. / Is this machine networked (y/n) n? y Would you like to configure using DHCP n? Please enter a hos

12、t name, which identifies this system on the network. Thename must be unique within the domain in which it resides; creating a duplicatehost name will cause problems on the network after you install Solaris.A host name must be at least two characters; it can contain letters, digits,and minus signs (-

13、). Enter host name : itellinPlease enter the Internet Protocol (IP) Address for this system. It must beunique and follow your sites address conventions, or a system/network failurecould result.IP Addresses contain four sets of numbers separated by periods (for example). Enter this machines IP Addres

14、s : 35Please specify the netmask of your subnet. A default netmask is shown; do notaccept the default unless you are sure it is correct for your subnet. A netmaskmust contain four sets of numbers separated by periods (for example). Enter the subnet netmask : Specify whether or not IPv6, the next gen

15、eration Internet Protocol, will beenabled on this machine. Enabling IPv6 will have no effect if this machine isnot on a network that provides IPv6 service. IPv4 service will not be affectedif IPv6 is enabled. Enable IPv6 n: Please provide name service information. Select the name service that will b

16、eused by this system, or None if your system will either, not use a name serviceat all, or if it will use a name service not listed hereAvailable name services:1. NIS+2. NIS3. DNS4. LDAP5. None Please enter the number corresponding to the type of name service you would like 5: Please select how to s

17、pecify your default time zone.Specify Time Zone by:1. Geographic region2. Offset from GMT3. Time zone file Please enter the number corresponding to how you would like to specify the time zone 1: Please specify your default time zone by geographic region.Select a region from the first menu and a time

18、 zone from the second menuAvailable Regions:1. Africa2. Asia, Eastern3. Asia, Western4. Australia / New Zealand5. Canada6. Europe7. Mexico8. South America9. United States Please enter the number corresponding to the correct region 1: 2Available Zones:1. Peoples Republic of China2. Taiwan3. Hong Kong

19、4. Japan5. Republic of Korea6. Singapore Please enter the number corresponding to the correct zone 1: 1Accept the default date and time or enter new values. The default date and time is Sun May 5 11:48:03 CST 2002 . Do you want to use this date and time (y/n) y? Type in an alphanumeric string to be

20、used as the root password for the computeryou are setting up. Enter the root password : Retype the above password for confirmation. Enter the root password again : Your system appears to be upgradeable.Do you want to do a Initial Install or Upgrade? 1) Initial Install 2) Upgrade Please Enter 1 or 2

21、1Select the geographic regions and software localizations you want to install.The English version of Solaris will be installed by default.1 Asia2 eastern europle3 middle east4 central america5 south america6 northren europe7 southern europe8 central europe9 north america10 australasia11 western euro

22、pe12 nothem africaTo edit a region selection, enter the number here. Enter n when finished. n 1Select which locales to install with the system. Locales marked with an X will be installed. To toggle locales in Asia, enter the number here. Enter n when finished. n 11.6 - 1 Asia 1.0 Japanese ( ja ) 1.1

23、 Japanese (Japan,PCK) ( ja_JP.PCK ) 1.2 Japanese (Japan,UTF-8) ( ja_JP.UTF-8 ) 1.3 Korean EUC 1.4 Korean(UTF-8 X 1.5 Simplified Chinese EUC X 1.6 Simplified Chinese GBK X 1.7 Simplified Chinese UTF-8 1.8 Thai 1.9 Traditional Chinese BIG5 1.10 Traditional Chinese EUC 1.11 Traditional Chinese UTF-8Nor

24、th America/ canada-English(ISO8859-1) canada-French(ISO8859-1) French X U.S.A.(en_US.ISO8859-1)Select the CDs and products you would like to install. X Entire Distribution plus OEM support 1654MB Entire Distribution 1622MB Developer system support 1573MB End user system support 1156MB Core system su

25、pport 415MBselect diskAvailable Disks Selected Disks C0t1d0 c0t0d01 swap 150023 Modify c0t0s00 / wqw 7759(/3 2000/4 2000/5 2000/6 10/7 2000begin installSolaris Web Start will assist you in installing software for Solaris. Please specify the media from which you will install the Solaris OperatingEnvi

26、ronment.Media:1. CD2. Network File System3. HTTP (Flash archive only)4. Local Tape (Flash archive only) Media 1: Please insert the first CD from which you will install the Solaris OperatingEnvironment.To select a different media, enter B to go Back. Reading CD for Solaris Operating Environment.The s

27、ystem is being initialized, please wait. To install basic Solaris products into their default directory locations,select Default Install.Custom install provides a choice of which Solaris products to install. For eachproduct, it also provides an option to customize the products install.Types of insta

28、ll available:1. Default Install2. Custom Install Select the number corresponding to the type of install you would like 1: 2Select the geographic regions and software localizations you want to install.The English version of Solaris will be installed by default. 0 Northern Africa To edit a region sele

29、ction, enter the number here. Enter n when finished. n 11 Select which locales to install with the system. Locales marked with an X will be installed. To toggle locales in Asia, enter the number here. Enter n when finished. n 11.6 - 11 AsiaSelect which CD(s) to install with the system. You will then

30、 be able to chooseindividual products on each CD. Enter the number corresponding to a CD to view its information. Enter n when finished n Additional ProductsTo scan for additional products, select the location you wish to scan.Products found at the selected location that are in a Web Start Ready ins

31、tallform will be added to the Products list.1. None2. Product CD3. Kiosk Download4. Local or Network File System Web Start Ready product scan location 1: Do you want 64-bit support? 64-bit support is required in order to use thisproduct in 64-bit architecture environments.1. Software will be install

32、ed with 64-bit and 32-bit support (Recommended).2. Software will be installed with 32-bit support only. Enter the number corresponding to your choice 1 Available Solaris Software groups:1. Entire Group Plus OEM2. Entire Group3. Developer Group4. End User Group5. Core Group Select the number correspo

33、nding to the desired Solaris software group 2: 1The Entire Solaris Software Group Plus OEM Support consists of the EntireSolaris Software Group plus additional hardware drivers, including drivers forhardware not present at the time of installation.Please indicate if you want the Default Packages for

34、 the Entire Group Plus OEMor if you want to select Custom Packages. Selecting Custom Packages allows youto add or remove packages from the selected Solaris Software Group. Whenselecting which packages to add or remove, you will need to know about softwaredependencies and how Solaris software is pack

35、aged.1. Default Packages2. Custom Packages Default Packages or Custom Packages 1 Select which disks you want to lay out the file systems on.Required disk space: 3,329 MBAvailable Disks: Disk Size c0t0d0 17269 MB c0t1d0 17269 MBEnter y to layout file systems on the specified disk. This will erase all

36、existing data on the disk. Enter n to leave the disk unmodified. Layout file systems on disk c0t0d0 (bootdisk) (y/n) y? Layout file systems on disk c0t1d0 (y/n) n? The Solaris Installer is determining size requirements based on your choices, please wait. /File System operations:1. Print the current

37、partition table2. Modify a disks partition table3. Done Select the number corresponding to a file system operation, or Done to proceed with the install 3: 2Available disks:1. c0t0d0 / 2305 MB 1002 Cyls swap 1026 MB 446 Cyls /export/home 13937 MB 6058 Cyls 2. c0t1d0 Not Selected 3. Done Select a disk

38、 to modify, or Done to return to the previous menu 3: 1 1) MB 2) Cyls Configure using Megabytes or Cylinders 1: Disk Name c0t0d0 TotalSpace 17269 Used Space 17268 Free Space -1 Round Error 2 # Slice Name Size Minimum Size 0. / 2305 MB 2305 MB 1. swap 1026 MB 1026 MB 3. Unused 4. Unused 5. Unused 6.

39、Unused 7. /export/home 13937 MB 0 MB 8. Done Select a slice to modify, or Done to return to the previous menu 8: 0 Enter new slice name: / Enter new slice size (in MB) 2305: 8000 Disk Name c0t0d0 TotalSpace 17269 Used Space 22963 Free Space -5694 Round Error 0 # Slice Name Size Minimum Size 0. / 800

40、0 MB 2305 MB 1. swap 1026 MB 1026 MB 3. Unused 4. Unused 5. Unused 6. Unused 7. /export/home 13937 MB 0 MB 8. Done Select a slice to modify, or Done to return to the previous menu 8: 3 Enter new slice name: data1 Enter new slice size (in MB) 10: 2048 Disk Name c0t0d0 TotalSpace 17269 Used Space 2501

41、1 Free Space -7742 Round Error 0 # Slice Name Size Minimum Size 0. / 8000 MB 2305 MB 1. swap 1026 MB 1026 MB 3. /data1 2048 MB 0 MB 4. Unused 5. Unused 6. Unused 7. /export/home 13937 MB 0 MB 8. Done Select a slice to modify, or Done to return to the previous menu 8: 4 Enter new slice name: data2 En

42、ter new slice size (in MB) 10: 2048 Disk Name c0t0d0 TotalSpace 17269 Used Space 27059 Free Space -9790 Round Error 0 # Slice Name Size Minimum Size 0. / 8000 MB 2305 MB 1. swap 1026 MB 1026 MB 3. /data1 2048 MB 0 MB 4. /data2 2048 MB 0 MB 5. Unused 6. Unused 7. /export/home 13937 MB 0 MB 8. Done Se

43、lect a slice to modify, or Done to return to the previous menu 8: 5 Enter new slice name: data3 Enter new slice size (in MB) 10: 2048 Disk Name c0t0d0 TotalSpace 17269 Used Space 29107 Free Space -11838 Round Error 0 # Slice Name Size Minimum Size 0. / 8000 MB 2305 MB 1. swap 1026 MB 1026 MB 3. /dat

44、a1 2048 MB 0 MB 4. /data2 2048 MB 0 MB 5. /data3 2048 MB 0 MB 6. Unused 7. /export/home 13937 MB 0 MB 8. Done Select a slice to modify, or Done to return to the previous menu 8: 6 Enter new slice name: data Enter new slice size (in MB) 10: Disk Name c0t0d0 TotalSpace 17269 Used Space 29117 Free Spac

45、e -11848 Round Error 0 # Slice Name Size Minimum Size 0. / 8000 MB 2305 MB 1. swap 1026 MB 1026 MB 3. /data1 2048 MB 0 MB 4. /data2 2048 MB 0 MB 5. /data3 2048 MB 0 MB 6. /data 10 MB 0 MB 7. /export/home 13937 MB 0 MB 8. Done Select a slice to modify, or Done to return to the previous menu 8: 7 Ente

46、r new slice name: data4 Enter new slice size (in MB) 10: 2048 Disk Name c0t0d0 TotalSpace 17269 Used Space 17228 Free Space 41 Round Error 0 # Slice Name Size Minimum Size 0. / 8000 MB 2305 MB 1. swap 1026 MB 1026 MB 3. /data1 2048 MB 0 MB 4. /data2 2048 MB 0 MB 5. /data3 2048 MB 0 MB 6. /data 10 MB

47、 0 MB 7. /data4 2048 MB 0 MB 8. Done Select a slice to modify, or Done to return to the previous menu 8: Available disks:1. c0t0d0 / 8000 MB 3478 Cyls swap 1026 MB 446 Cyls /data1 2048 MB 891 Cyls /data2 2048 MB 891 Cyls /data3 2048 MB 891 Cyls /data 10 MB 5 Cyls /data4 2048 MB 891 Cyls 2. c0t1d0 No

48、t Selected 3. Done Select a disk to modify, or Done to return to the previous menu 3: File System operations:1. Print the current partition table2. Modify a disks partition table3. Done Select the number corresponding to a file system operation, or Done to proceed with the install 3: The following i

49、tems will be installed: Solaris Operating Environment: Solaris 8 Software 7/01 Solaris Software Group: Entire Group Plus OEM 64-Bit Selection: Yes Region and Locales: North America English (United States) ( en_US ) Asia Chinese ( zh ) Chinese (GBK) ( zh.GBK ) Chinese (UTF-8) ( zh.UTF-8 ) English (PO

50、SIX C) ( C ) System Locale: English (United States,ISO8859-1) ( en_US.ISO8 Products: Solaris 8 Documentation European 204. AnswerBook2 Documentation Server 37.4 European Collections for Solaris 8 16 Solaris 8 Documentation Asian 142.5 M AnswerBook2 Documentation Server 37.4 Asian Collections for Sol

51、aris 8 105.1 Multilingual Computer Systems Supplement CD CDRW 1.0 0.5 MB Java3D 1.2.1 17.9 MB OpenGL 1.2.1 79.3 MB PC launcher 1.0.1/PC file viewer 1.0.1 RSC 2.1 9.2 MB ShowMe TV 1.3 22.4 MB SunATM 5.0 8.4 MB SunFDDI PCI 3.0 1.4 MB SunFDDI SBus 7.0 1.5 MB SunForum 3.1 19.1 MB SunHSI PCI 3.0 0.5 MB S

52、unHSI SBus 3.0 0.5 MB Sun Hardware AnswerBook 8.1 MB SunVTS 4.4 58.8 MB Enter y to accept these values and start the installation, or n to return to the beginning and make changes (y/n): Please type one of y or n Enter y to accept these values and start the installation, or n to return to the beginn

53、ing and make changes (y/n): yInstalling.Installing Solaris software group|-1%-25%-50%-75%-100%|Installation details: Product Result More Info 1. Solaris 8 Software 7/01 Installed Available 2. Done Enter the number corresponding to the desired selection for more information, or enter 2 to continue 2:

54、 Please specify the media from which you will install Solaris 8 Software 2 of 2(7/01 SPARC Platform Edition).Alternatively, choose the selection for Skip to skip this CD and go on to thenext one.Media:1. CD2. Network File System3. Skip Media 1: Please insert the CD for Solaris 8 Software 2 of 2 (7/0

55、1 SPARC PlatformEdition).After you insert the CD, please press Enter.Enter S to skip this CD and go on to the next one.To select a different media, enter B to go Back. Reading Solaris 8 Software 2 of 2 (7/01 SPARC Platform Edition). |Launching installer for Solaris 8 Software 2 of 2 (7/01 SPARC Plat

56、formEdition). Please Wait.Installing Solaris 8 Software 2|-1%-25%-50%-75%-100%|Installation details: Product Result More Info 1. Solaris 8 Software 2 Installed Available 2. Done Enter the number corresponding to the desired selection for more information, or enter 2 to continue 2: End of Solaris 8 S

57、oftware 2 installation. Please specify the media from which you will install Solaris 8 Languages (7/01SPARC Platform Edition).Alternatively, choose the selection for Skip to skip this CD and go on to thenext one.Media:1. CD2. Network File System3. Skip Media 1: Please insert the CD for Solaris 8 Lan

58、guages (7/01 SPARC Platform Edition).After you insert the CD, please press Enter.Enter S to skip this CD and go on to the next one.To select a different media, enter B to go Back. Reading Solaris 8 Languages (7/01 SPARC Platform Edition). -Launching installer for Solaris 8 Languages (7/01 SPARC Plat

59、form Edition).Please Wait.Installing Solaris 8 Simplified Chinese Localization Log file: /a/var/sadm/install/logs/Solaris_8_Simplified_Chinese_Localization_install.B05040948 installed pkg: SUNWcadis installed pkg: SUNWcdcl installed pkg: SUNWcddst installed pkg: SUNWcfdl installed pkg: SUNWcj2p inst

60、alled pkg: SUNWcj2rt installed pkg: SUNWcjmfp installed pkg: SUNWcjvdv installed pkg: SUNWcjvrt installed pkg: SUNWcleue installed pkg: SUNWcmga installed pkg: SUNWcodte installed pkg: SUNWcpdas installed pkg: SUNWcreg installed pkg: SUNWcscgu installed pkg: SUNWcsmc installed pkg: SUNWcttfe install