曙光服务器做RAID步骤

1、曙光服务器做raid步骤1 根据服务器屏幕提示，按相应的键进入raid界而，选择start后进入如图界而2.选择 Configuration Wizard 后回车3.首先淸空原有的RAID信息，选择Cleaar Configuration,然后点击Next,再选择后续的Yes5.然后选择Manual conf iuration进行手动做RAID,再点击NextDriue Group Definition： To add drives to Driue Group,hold Control key while selecting Unconf Good drives and click on A

2、dd to Array. Then Accept Driue Group. Driue addition can be undone by selecting the Reclaim butto n.X Cancel .细 Back“ NextDrivesDriue Groups6.按住向F键和shift键选取要进行做raid的硬盘，点击Add to array7点击 Accept DGBackDrive Group Definition: To add drives to Drive Group bold Control key while selectinUnconf Good drive

3、s and click on Add to Array. Then Accept Dr: Group. Drive addition can be undone by selecting the Reclairo button.8.选择点击Nextpan Definition：X沁7To add array hole to a Span> select an array hole from the drop-doun.Click on Add To Span. Array hole will be added 1 span.Array Hole addition can be undon

4、e by selecting the Reclaim button9选择点击Add to SPAN10.选择点击Next11.在RAID Level中选择要做raid的级别，在Select Size中根据右侧的提示填入选择好 的raid所做的磁盘大小，然后点击Accept12点击 NextDriuesEackplaneIX CancelUirtual Driues13点击 Accept Drives Events迅C Faac InitializeC Slov InitializeC Check ConsistencyC PropertiesC Set Boot Drive (current-

5、 NCWE)15. ALT+E选取Exit,后续点击Yes,然后CTRL+ALT+DELETE重启服务湍14. ALT+H 选取 Home,回车 Adv&need Softu“皿审 Contirollei： Selection.Contxolleir Propeixxes Scan Devices Victual Drives Conf lgumtnon Vizard Physical View怛g xoup: 0, "ID 6LgB VirtualUS Virtual Drive: 0,1435 TB, Optimal LQ| Drives ； Bqckpbn® S】ot:0, SJLS, HDD, 837258 GB, Online 弋Backplemq Slot% SAS, HDD，837却 GB, Online ；BacXpldne