技术开发委托合同(中英文对照)-_修正版

1、修正版Technology Development Contract技术开发（委托）合同Entrusting Party (Party A):委托方（甲方）：Address:地址：Tel:Fax:Entrusted Party (Party B):受托方（乙方）：Address:地址:Tel: Fax:Party A entrust Party B to research and develop Technique Proposal Of Smart T/RVerification System. Party B will develop key circuits verification f

2、or the Solution and will be in charge of general thought plan.The following articles are reached and abided by the both parties.甲方委托乙方设计智能收发验证系统技术方案，乙方将设计开发方案的验证电路及负责整 体思路的建立，为此订立以下协议，并由双方共同恪守。Article 1 Definitionsto第一条 定义1.1 "Technique Proposal Of Smart T/R Verification System (hereinafter ref

3、erred as “the Solution ” )" shall meanall the required techniques to construct the general idea which will commit the attached technical requirements. The Solution shall include all technical details of all designing schemes and experimental verification for key circuits.智能收发验证系统技术方案（以下简称“方案” ）

4、，是指设计满足附件要求的总体技术方案， 所需要的解决方案。该解决方案包括全部设计方案资料及关键电路验证技术资料。1.2"Technical documentations" shall meanall the necessary documents to design theSolution and all the verification documents that Party B will use in designing theSolution.技术资料，指研发解决方案所必需的资料，包含乙方在设计方案的过程中，所使用的全部 有关验证技术资料。1.3 “R&D”

5、 shall mean research and development.“R&D,是指研究和开发。1.4 ” T/R” shall mean transmit and receive.“T/R”，是指发射和接收。1.5 ” Soc” shall mean system on chip.SOC” , 是指系统级芯片。1.6 ” ASIC” shall mean application specific integrated circuit.” ASIC” , 专用集成电路。Article 2 Contents & scopes of contract合同技术方案要求第二条 合同

6、内容和范围2.1 The requirements of the contract Solution2.1.1 Technical Content 技术内容 :(1) Design technical proposal;设计技术方案；(2) Key circuits verification;验证关键电路；(3) Detailed technical requirements see technique attachment.详细技术要求见技术协议附件。2.1.2 Technical Method and Strategy 技术方法和路线 :(1) Should adopt SOC and A

7、SIC technology;采用SOC和ASIC技术;(2) Should adopt the smart T/R system to verify the key circuits.双方义务采用智能收发组件系统对关键电路进行实验验证。2.2 The obligations of both parties2.2.1 Party B shall submit the R&D plan to Party A within two months after this contract comes into effect.乙方应在本合同生效后 2 个月内向甲方提交研究开发计划。2.2.2 P

8、arty B shall accomplish the Solution design work according to the followingschedule ：乙方应按下列进度完成方案设计工作：(1)Phase one 第一阶段：1) Initialization phase: select foundary, obtain design documents, analyzeprocessfiles, establish computer system, rent and purchase EDA software,primarycommunicate design thought

9、of verification circuits and general Solution;启动阶段：晶圆厂的选定、设计文件的获得、工艺文件的分析、计算机系统的建立、EDA软件的租用及购买、验证电路与整体方案设计思路的初步沟通；2)Design phase: module division of chip, principle design, computer simulation,layout design;设计阶段：芯片的模块划分、原理设计、计算机仿真、版图设计；3)Test phase: primary test and consecutive test.测试阶段：初测及继续测试。(2)

10、Phase two: Alter the Solution according to the first phase results, and startsecond run.第二阶段：根据第一阶段测试结果对方案进行修改，同时配合总体设计进行修改。2.2.3With the both parties' confirmation and on the request of Party A, Party Bshall provide technical guidance and training to the personnel designatedby PartyA or provide

11、 the technical service related in the fulfillment Solution after theSolution is qualified by the verification circuits.双方确定，乙方应在合同方案的关键电路验证合格后，根据甲方的请求，为甲方指定的人员提供技术指导和培训，或提供与完成方案相关的技术服务。2.2.4 With the con firmati onof the both p arties,within the validity of the Con tract,Party A shall desig nate as

12、Party A's P roject con tact person. Party B shallappoint asP arty B' s p roject con tact person. If any cha nges of the con tact person occur, one p arty shall inform the other p arty based on writte n materials in due time. If one p arty fails to promp tly inform the other p arty, it shall

13、be heldrespon sible for any in flue nee or damagecaused by the un timely no tificati onduri ngthe p erforma nee of the Con tract.双方确定，在本合同有效期内，甲方指定为甲方项目联系人，乙方指定 _为乙方项目联系人，一方变更项目联系人的，应当及时以书面形式通知另一方。未及时通知并影响本合 同履行或造成损失的，应承担相应的责任。2.3 Delivery 交付P arty B shall deliver the con tract Soluti on to party A

14、in accorda nee with the contents as sp ecified in item 2.2.2 of the con tract.乙方应按本合同条款2.2.2规定的内容，将合同方案技术资料交付甲方。2.4 Assessme nt & Acce pta nee 合同方案的验收Con firmed by the both p arties,P arty A shall adopt the sig ned sta ndards and methods to exam ine and acce pt the con tract Soluti on by Party B

15、.双方确定，按所签订的验收标准对乙方完成的合同方案技术进行验收。2.4.1 To en sure that the con tract Solutio n supp lied by party B is correct ， reliable and advanced ， Party A,B shall jointly perform the assessment and acceptance of the technical Solution and core circuit in accordance with the provisions of items 2.1-2.3 of the c

16、ontract and technique attachment. if the technical Solution are qualified, both parties shall jointly sign a certificate of acceptance in two copies ， one for each party.为了保证乙方提供合同方案的正确性、可靠性和先进性，由甲乙双方技术人员一起，按本 合同 2.1-2.3 及技术协议附件规定， 共同对技术方案设计和核心电路进行考核和验收 . 考核 验收合格后，双方代表要签署验收合格证书一式两份，双方各执一份为凭。2.4.2 If

17、 the Solution cannot meet the requirements of the contract, both parties shall hold friendly discussions to analyze the reasons and take measures to correct any defect and prepare for the second assessment and acceptance of the contractSolution. If the Solution are still not qualified after the seco

18、nd assessment and acceptance and the responsibility lies in Party B ,Party B shall be responsible for all the losses thus caused, Party A shall have the right to terminate the contract； if the responsibilityand raise a claim against Party B according to Article 6 lies in Party A, both parties shall

19、mutually discuss the further implementations of the contract.如果考核验收达不到本合同的规定要求，则双方要友好协商，共同研究分析原因，采取措 施，消除缺陷，进行第二次的考核和验收。若经过第二次考核仍不合格，如属乙方责任， 则乙方应承担由此而造成一切损失，甲方有权终止合同并按第 6 条的规定由甲方向乙方索 赔，如属甲方责任，则双方应共同协商本合同的进一步执行问题。2.5 Contract technical Solution results and related intellectual property ownership 合同技术

20、方案研发成果及相关知识产权的归属Con firmed by the both p arties,the tech ni calSoluti on results and related in tellectual property right gen erated from the Con tract shall be settled by the followi ng methods.双方确定，因履行本合同所产生的研究开发成果及其相关知识产权权利归属，按以下式处 理:2.5.1 Party A has the right to apply for the p ate nts. The use

21、 and the releva nt allocati on of ben efits after obta ining the p ate nt right are as followi ng: PartyA will own the p ate nt right and ben efits .甲方享有申请专利的权利。专利权取得后的使用和有关利益分配方式如下：专利权为甲方 所有，利益归甲方所有。2.5.2 The p rofit causedfrom the use and tran sfer ofthe own ersh ip of p ate nt right shall be deal

22、t by the follow ing ways:有关使用和转让的权利归属及由此产生的利益按以下约定处理(1) The right to use tech ni cal secret: Owned by party A:技术秘密的使用权：归甲方所有;(2) The right to tran sfer tech ni cal secret: Owned by party A;技术秘密的转让权：归甲方所有;(3) The method to allocated the releva nt ben efits: Owned by party A;相关利益的分配办法：归甲方所有。2.5.3 The

23、owner of the p hysical fixed property which were bought by Party B rights of equipmen ts, in strume nts p rocured with the funds of research and devel opment isParty B 。乙方利用研究开发经费所购置与研究开发工作有关的设备、仪器等实物固定财产，归 方所有。2.5.4 With the both p arties ' con firmatio n, Party A has the right to utilize the r

24、esearch and devel opment achieveme nts pro vided by P arty B in accorda nee with thesti pu lati onin the Con tract to make follow-u pimpro veme nt. Thereby the new tech no logic achieveme nts with the feature of substa ntial or creative tech no logy p rogress and its right adscri pti on shall be sha

25、red by P arty A . The detailed allocati on of the related ben efits shall be as follows: Owned by p arty_A双方确定，甲方有权利用乙方按照本合同约定提供的研究开发成果，进行后续改进。由此甲方享有。具体产生的具有实质性或创造性技术进步特征的新的技术成果及其权属，由相关利益的分配办如下：归甲方所有。2.5.5 After the acco mp lishme nt of the R&D works sti pu lated in the Con tract, PartyB has the

26、 right to take use of the research and devel opment achieveme nts to make follow-u p imp roveme nt. Thereby the new tech no logic achieveme nts with the featureof substa ntialor creative tech no logy p rogress shall be owned by Party B . The detailed allocati on of the related ben efits shall be as

27、follows: Owned by PartyB.乙方有权在完成本合同约定的研究开发工作后，利用该项研究开发成果进行后续改进。由乙方所有。具体相关利此产生的具有实质性或创造性技术进步特征的新的技术成果，归 益的分配办法如下： 归乙方所有。Article 3 Con tract p rice第三条合同价格3.1 Accord ing to the con tract contents and scopes as sp ecified in Article 2, the total p rice of the con tract Soluti on p rovided by Party B in

28、cludi ng the desig ns.drawi ngs, tech ni cal service and trai ning shall amount to按第二条所规定的合同内容和范围，乙方所提供的合同方案包括设计方案、设计图纸、技术服务和技术培训等的全部资料总价格为美兀。3.2 The above con tract p rice is fixed and shall in clude the expen ses of all thetech ni cal docume ntatio n sp ecifiedin Article 2 of the con tract.Such co

29、n tract p riceshall also include the expenses for party B to carry outthe other con tractobligati ons of this con tract.上述合同的价格为固定价格，包括本合同第二条所规定的全部技术资料。该价格包括乙方在本合同中所承担的其他义务的全部费用在内。3.3 All the calculati ons and p ayme nt of expen ses of this con tract shall be in USdollars.本合同内的一切费用均以美元计算和结算。Article

30、4 P ayme nt & P ayme nt con diti ons第四条支付与支付条件4.1 Initializationexpenses after contract signing: Party A shall pay eighty thousand dollars to Party B;合同签订后启动费用：甲方支付乙方 8 万美元；4.2After the whole primary Solution provided by Party B is qualified, Party A shall pay one hundred and twenty thousand dol

31、lars to Party B;乙方整个初步方案通过后，甲方支付乙方 12 万美元;4.3After selecting foundary , Party A shall pay one hundred and fifty thousand dollars to Party B;选定晶圆厂后，甲方支付乙方 15 万美元；4.4After providing the design Solution and simulated results, Party A shall pay three hundred thousand dollars to Party B;提供设计方案及模拟结果后，甲方支付

32、乙方 30 万美元；4.5After providing verification circuits and qualified, Party A shall pay eight hundred and seventy thousand dollars to Party B.测试电路提供后并验证了电路后 , 甲方支付乙方 87万美元。Article 5 Infringements and Confidentiality第五条 侵权和保密5.1 Party B guarantees that the Solution supplied by each party without anyinter

33、fereneeor charge from any thirdparty. In case of any interfereneeor charge from a third p arty, they shall be han died by each p arty and the third p arty. therespon sibility and loss,either legally or economically， shall be borne by partyB.乙方保证所提供的总体方案不受任何第三者干涉和指控。如果发生第三者干涉和指控，则 由乙方负责同第三者进行交涉，并由其承担

34、法律上和经济上的全部责任和损失。5.2 After term in ati on of the con tract term, Party A shall still have the right to use the Soluti on and tech ni cal docume ntatio ns to manu facture releva nt p roducts.在本合同终止后，甲方仍有权继续使用乙方提供的技术方案和全部技术文件进行相应产品 的生产。Article 6 Guara ntees and Claims第六条保证和索赔6.1 With the both p arties&

35、#39; con firmati on, either party breaches the Con tract and thereby causes a sta ndstill, delay or failure in research and devel opment work,the responsible Party shall undertake the responsibilityaccording to the following st ipu lati ons双方确定：任何一方违反本合同约定，造成研究开发工作停滞、延误或失败的，按以下约 定承担违约责任：(1)lf P arty

36、 A breaches Article 4 in the Co ntract, the res pon sible party shall pay pu rsua nt to the amount of ten p erce nt (10%) of the con tract p rice (methods for compu ti ng the amount of breach of con tract damagesa nd the compen sati on for losses).甲方违反本合同第4条约定，应当 按合同总额的10%咅偿支付 （支付违约金或损失赔 偿额的计算方法）。(2

37、)lf P arty B breaches Article 2 ,4 or 5 in the Con tract, the res pon sible party shall pay pursuant to the amount of ten p erce nt (10%) of the con tract p rice (methods for computing the amount of breach of con tract damages and the compen sati on for losses).厶方违反本合同第 2、4或者5 条约定，应当 按合同总额的10%咅偿支付 （

38、支付 违约金或损失赔偿额的计算方法）。6.2 As for the liability for risks invo Ived in a failure or p artial failure in research and development caused by insurmountable technical difficulties under the curre nt tech no logy and con diti on occurri ng in the p rocess of p erforma nee of theCon tact, it shall be un dert

39、ake n by the both p arties in accorda nee with the follow ingst ipu lati ons:un dertak ingby both sidesappoin tme nts,appoin tme ntsfirst .Con firmed by both p arties, the tech ni cal risk sti pu lated in the Con tact shall be assessed in the manner of acquirements of authority accepted . The main c

40、ontent of the technical risk assessment shall include its existenee, scope, degree, loss and so on. The tech ni cal risk assessme nt should have the follow ing basic con diti ons : 在本合同履行中，因出现在现有技术水平和条件下难以克服的技术困难，导致研究开发失 败或部分失败，并造成一方或双方损失的，双方按如下约定承担风险损失：双方约定承担约定优先。双方确定，本合同项目的技术风险按当事人认可的专家权威机构确认的方 式认

41、定。认定技术风险的基本内容应当包括技术风险的存在、范围、程度及损失大小等。认定技术风险的基本条件是:(1)The tech nique men ti oned in the Con tract is difficult eno ugh for the p rese nt tech no logic level;本合同技术在现有技术水平条件下具有足够的难度;(2)Party B subjectively commits no fault and the failure of research and development is con sidered by exp erts as reas o

42、n able.乙方在主观上无过错且经认定研究开发失败为合理的失败。6.3 Once one p arty discovers that the situati on is likely to cause a failure orpartialfailure in research and development, the Discoverer shall inform the other party of the situation within five days and take appropriate measures to reduce losses. If one party fai

43、ls to inform the other party in due time and take appropriate measures and as a result the losses are aggravated, the res pon sible P arty shall5日内bear the liability for the aggravated part of the losses.一方发现技术风险存在并有可能致使研究开发失败或部分失败的情形时，应当在 通知另一方并采取适当措施减少损失。逾期未通知并未采取适当措施而致使损失扩大的, 应当就扩大的损失承担赔偿责任。6.4 I

44、n the p erforma nee of the con tract, the tech no logy which is the object of a research and devel opment has bee n made p ublic by others (in clud ing the form ofp ate nt).Oneparty shall no tify the other party to resc ind the con tract within three days. If one party fails to inform the other p ar

45、ty in due time and as a result the other p arty losses occur, the other p arty has right to claim compen sati on for its losses.在本合同履行中，因作为研究开发标的的技术已经由他人公开（包括以专利权方式公开）一方应在3日内通知另一方解除合同。逾期未通知并致使另一方产生损失的，另一方有权要求予以赔偿。Article 7Taxes and Duties第七条税费Any tax relati ng to the impi eme ntati on of the con tra

46、ct imp osed shall be afforded by each party res pectively.甲乙双方将各自承担所在国（地区）所应支付的税费。Article 8 Force Majeure第八条不可抗力earthquake and otherForce majeure shall refer to war, flood, fire, typhoon.accidents that both parties mutually agree as force majeure. In case of force majeure, the affected p arty shall

47、no tify by telex or cable the other p arty of the accide nt as soon as possible and send by registered air - mail to the other party the evideneeissued by the localgover nment with in 14 days from the accide nt. if the imp leme ntatio n is affected by force majeure and the accide nt lasts for more t

48、ha n20 days, both parties shall hold friendlydiscussions as soon as possible with regard to the further impI eme ntati on of the con tract.人力不可抗力的因素，如战争、严重水灾、火灾、台风、地震，以及双方同意的其他人力 不可抗力因素。发生人力不可抗力的责任方应尽快将发生人力不可抗力事故的情况，在尽可能短的时间内，用电传或电报通知另一方，并于事后14天内，以航空挂号信将有关政府当局出具的证明文件给另一方，予以认证。因发生不可抗力而影响了合同的执行，如果事故延续

49、 20 天以上，则双方应尽快通过友好协商方式协商合同的进一步执行问题。Article 9 Arbitration第九条 仲裁All disputes in connection with this Contract or the execution thereof shall besettled friendly through negotiations. In case no settlement can be reached, thecase may then be submitted for arbitration to the China InternationalEconomic a

50、ndTrade Arbitration Commission (Beijing) in accordance with itsArbitrationRules .The arbitration shall take place in Beijing and the decision of theArbitration Committee shall be final and binding upon both parties; neither partyshall seek recourse to a law court or other authorities to appeal for r

51、evision ofthe decision. Arbitration fee shall be borne by the losing party.所有与此合同有关的争议应通过友好协商解决，若通过协商无法达成一致，此争议应提交中国国际经济贸易仲裁委员会进行仲裁。仲裁应在北京进行 , 其结果对双方均有约束力，任何一方均不应向法院或其他政府部门申请以改变仲裁结果。仲裁费由败诉方负担。Article 10 Effectiveness of the Contract and Miscellaneous第十条 合同的生效及其他10.1 After this contract is signed by

52、the duly authorized representatives of bothparties ， both parties shall submit the contract to their governments or boardsof directors for approval, the date when the later party obtains the approval shallbe taken as the effective date of the contract. Both parties shall attempt to getthe contract approval within60 days from signing and notify by telex or cabletheother party of the approval which is confirmed by the following registered air - mail letter.本合同由双方代表签订后，