压力疲劳试验报告

1、测试报告序列号：11YLPL压力疲劳试验报告Test Report on Pressure Fatigue样件名称(Sample Name)委托部门(Client)考前须知DECLARATION1.未经研发部书面同意，不得局部地复制本报告。This test report shall not be duplicated without prior written approval of theR&D department.2.报告无测试人员，审核，批准人签名无效。The report is invalid in case of no signatures of inspector, r

2、eviewer andapprover.3.报告涂改无效。The report is invalid in case of sign of erasure.4.委托检验结果仅对所检验样品有效。Inspection result only bears responsibility for the received sample in case ofcommissioned inspection.3样品型号Sample model申请单编号Application NO.YLPL产叩编勺Product NO.委托单位Client设计压力(MPa)Design pressure测试压力(MPa)Tes

3、t pressure试验依据Test standard板片材料Plate material板片厚度(mm)Plate thickness生产厂家Supplier钎焊材料Brazing material材料厚度(mm)Material thickness生产厂家Supplier高度(mm) Height宽度(mm) Width厚度(mm)Thickness接样日期Reception date完成日期Finish date测试目的Testproposal样品描述Sam可对波型，板型，片距，接管及角孔尺寸，分配器，垫片，加强板等情况进行描 述。Others: Adding description i

4、n structure parameter, performance parameter, drawings, and soon.接管外螺纹Connection, external threadple description4测试条件测试结果或偏离分试验装置Test equipment试验环境温度oCAmbient temperature升压时间sHigh pressuretime降压时间sLow pressure time加载波型Load curve正弦波Sine Wave压力疲方测试台Pressure fatigue test rig试验介质温度oC 20Medium temperatur

5、e上讪压力MPa 3.0 High pressure下限压力MPa 0Low pressure另一侧压力MPaPressure ofanother side试验用介质Medium20循环速率Cycle rate保压时间(s)Remain pressuretime保压时间sRemain pressuretime疲劳实验压力MPapressure fatiguetest pressure压力循环实测压力 -时间曲线Pressure fatigue test graph, pressure vs timeTest conditioTest process record测试侧:Q3-Q4 Test side:Q3-Q4循环/次，未/内漏。cycles, not/internal leakage.analysis签发日期Release