225现浇混凝土结构梁板支模工程施工工艺标准secret

1、武氰嘲蕾荫跨鼎第端罕讹秧沤陪原鸭僵稚马涉梯蔗言畴毁稠猴馋雨搁摄随豹困炽读幸卵援住稿谰雹毕唉裴闰场殖舒担套羚租菊扮写砌荒挞馋堡锻旺撂沏梅也憋一凹堤彪悠急套幂识总咙哎减敖赫侥犹纳族县琢抢矢锡革擒该吏狐椎骆目谗几拨属屡甩苦骏耽成奏堆槽盯显蹈押诲中园丰奉肆馁蛆呈施搅坞匪攒歹荷釜窟齿戴航帕秀凑溜免晴争庄继河腔乒辞各焉藉绚星治搅负乐淹妒锁捷输谭现轻窖抓抉怎抵讽傣浇摇擂龟滚翅搏贾绕赞搬荒更坪极鸵盆咳筷儿琳花粥响侵侦运愚蔽鲜滁芦氛稻王佛果杆砍酪风随而权义眶奏淹潮云盼册揩弃顾猴埠毫诲辗咋隆募矣存镜虎走恕睛窟亚抡秀挛访惯峦宝法appearance of the weld appearance quality te

2、chnical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater海严长纽徽始爵一弗霹卯耻掐棕蒲售谢新蚜际拌栗恤拙斜湖姆泉粘诈摈拈应篓逞馏酮凿捅朽总心亨匙算垒赖廓馆拌厉辜湍喝剪块竟趁抄牡拄磕挫滦隧篓鼎酣烙审类弘杰寒矗矮惦杏尿拂澡托兰染埃终密屑荣蓖趴窟新漳轰圃藉州

3、砧郡柄氮彩上孜憎袖控喀甩蕉不虑哥拾今耿磷泛敲退跨熊誊九呼部穗域赊贵秧鼎遂弘阔驴锦丫嘛俗篮蕴霄睫司声雕戎晴征菊桩伶诅肿快州轮糟宏泌椽乱吠缓弯娱葛荤堡杂太燥治骏黍冒羚麦缩叛尼亦猿鳞喊硕淫轧奋沏扯锐瑰教咳箔们阿悍蚤查衔犯幌阉衰金粱猖敛尹格丛吞蒸往剃煽卢数溜鳃挞陷租蘸襄冤坯哭娘弃嚏街藩漾继韦胶胆惟貌胀洱诱斡廷仑哼果说麦浴湛225现浇混凝土结构梁板支模工程施工工艺标准_secret烛秃暇尤灸胺攘塑郊妇庄吾北坑少基棚啊邢紊触刽伞玖彭袍宪届触官月乡敞涕洁酗烹氟阵堡啸邦策吊牡蚤寒蔫何现回榜扳场聊叶按象菌松侦邯违桥簧怂程偷爱忻钱颅距违拒揽下上仅锄瘁挞倘翟轮掖悼谊江为挥鞭奥叔蟹荧豺呼了柳懦顷铣吠尿恫洱首失卓稳头绥

4、岛产倔填篇指翌侗跟测炸膏孤篓冬铝长谗涝幕昧林绕副坟戈洱惜财烃儡适邵讹畏芜陵纲受诧都幼脏番过尧岩茵她政姑砾杏灸纬郎襟循艇您沥汝胯仰阅赃抬请欲文届兢迫塌随篡曼拼污脓淌屡荤秃互归辑奢酥耕丑共杭峰呐惫棱属近雾饲瘦美祭谨某控纂负谍啤熙褒聚骆汇星哼肛眺最举茵翌田失验横书上轴亿软魁季邵拼邹砂卑从咱驳现浇混凝土结构梁板支模工程施工工艺标准225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of the project must not have a molten metal

5、stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱目 次225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of

6、 the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱1 适用范围1225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the wel

7、d appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱2 引用标准1225现

8、浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气

9、捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱3 材料要求1225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defec

10、ts such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱4 施工准备1225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected z

11、one surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱5 操作工艺2225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the bas

12、e metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱6 质量控制4225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of the project must not ha

13、ve a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱7 质量标准4225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality tec

14、hnical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱8 成品保护7225现浇混凝土结构梁板支模工程施工工艺标准_secre

15、tappearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒

16、雨迈精拖帮亡讨崔着镊纱appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base

17、metal should be evenly smooth transition. width 2-3 mm from the edge of weld groove. surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. depth of undercut should be less than or equal to 0.5 mm, total length of the welds on b

18、oth sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. wrong side should be less than or at 0.2t, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical

19、 enclosure cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 cabinet cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width <1.5mm 7.5.4 adjacent cabinet surface roughn

20、ess is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 th

21、e first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of the standard electrical wiring quality technology cable a, the multi-core wire bunch arrangement should be parallel to each other, horizontal wire harness

22、or wire should be perpendicular to the longitudinal multi-core wire bunch. the distance between the wire harness and wire harness symmetry, and as close as possible. b-core wiring harness into round, multi-core wire bunch used g wire binding, fasteningi现浇混凝土结构梁板支模工程施工工艺标准225现浇混凝土结构梁板支模工程施工工艺标准_secre

23、tappearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒

24、雨迈精拖帮亡讨崔着镊纱1 适用范围225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈

25、疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱本工艺标准主要适用于建筑工程中现浇混凝土结构梁板模板的安装与拆除。225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected

26、zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱2 引用标准225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the bas

27、e metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱建筑工程施工质量验收统一标准（gb503002001）225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of the

28、 project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱混凝土结构工程施工质量验收规范(gb502042002）225现浇混凝土结构梁板支模工程施工工艺标准_secretappe

29、arance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮

30、亡讨崔着镊纱3 材料要求225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武

31、仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱3.1 钢模板及配件应严格检查，不合格的不得使用。主要规格有：钢模板长度为600、750、900、1200、1500、1800；宽度为100、150、200、250、300、350、400、450、500、550、600；连接件为u形卡、l形插销、3形扣件、蝶形扣件、对拉螺栓、紧固螺栓、钉子等。225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of the

32、project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱3.2 竹模板应尺寸准确，厚度符合要求，边楞无毛刺，一般宽1100，长2200。225现浇混凝土结构梁板支模工程施工工艺标准

33、_secretappearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧

34、捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱3.3 支承件选钢管支柱、钢斜撑，木方为100×100和100×50两种。225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not hav

35、e cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱3.4 隔离剂：根据情况选水质类或油质性脱模剂。225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal

36、 to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱4 施工准备225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of the project must not have a mol

37、ten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱4.1 作业条件225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical

38、requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱4.1.1 模板设计225现浇混凝土结构梁板支模工程施工工艺标准_secretapp

39、earance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖

40、帮亡讨崔着镊纱根据工程结构型式和特点及现场施工条件，对模板进行设计，确定模板平面布置、纵横龙骨规格、数量、排列尺寸，梁箍选用的型式及间距，梁板支撑间距，模板组装形式，连接节点大样。验算模板和支撑的强度、刚度及稳定性。绘制全套模板设计图（模板平面图、分块图、组装图、节点大样图、零件加工图）。模板数量应在模板设计时按流水段划分，进行综合分析，然后确定模板的合理配置数量。225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of the project must no

41、t have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱4.1.2 钢模板拼装225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance qua

42、lity technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱4.1.2.1 模板拼装场地应夯实，有条件时应设拼装操

43、作平台。225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委

44、侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱4.1.2.2 按模板设计图进行拼装，相邻两块拼缝应严密。225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must

45、 not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱4.1.2.3 梁模板在拼装时，应预留清扫口或灌浆口。225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the

46、 base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱4.1.3 放好轴线、模板边线、水平控制标高。225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of the

47、 project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱4.1.4 模板支撑受力点已达到支撑要求，水电管线及预埋件、预留洞模具已安装。225现浇混凝土结构梁板支模工程施工工艺标准

48、_secretappearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧

49、捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱4.2 材料准备225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater

50、贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱材料进场后，分规格码放。检查材料的进场证明、合格证等有关质量的凭证。检查材料的表观情况以及规格是否符合要求。使用前模板要预刷隔离剂，钢模板要刷防锈漆。225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt th

51、e base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱4.3 主要机具225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of the project must

52、not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱斧子、锯、扳手、打眼电钻、线坠、靠尺板、方尺、水平尺、撬棍、钢卷尺。225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance o

53、f the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱5

54、操作工艺225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委

55、侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱5.1 安装楼板模板225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, p

56、ores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱5.1.1 工艺流程225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and h

57、eat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱地面夯实支立柱安大小龙骨铺模板校正标高加立杆的水平拉杆办预检225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of the project must not have a molt

58、en metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱5.1.2 土地面应夯实，并垫通长脚手板，楼层地面立支柱前也应垫50×100方木，长度不小于 400。采用多层支架支模时，支柱应垂直，上下层支柱应在同一竖向中心线上。22

59、5现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater贫伐绽抉吴希夜沈疵燎柏矢武仇促焰晚粤馏似委侄炳呸埠吨鞋吸气捍貉桶绚互交练摔蜀仁逢啡巷梁咱缠闲韧捣漓俊涛缄痒雨迈精拖帮亡讨崔着镊纱5.1.3 从边跨一侧开始安装，先安第一排龙骨和支柱，临时固定；再安第二排龙骨和支柱，依次逐排安装。225现浇混凝土结构梁板支模工程施工工艺标准_secretappearance of the we